Camshaft Bearing Position
Show/hide table
Illustration 1 | g03043756 |
Right side view |
Show/hide table
Specification for 219-4711 Cylinder Block Gp and 370-9890 Cylinder Block Gp | |||
Item | Qty | Part | Specification Description |
The camshaft bearings from the rear surface of the cylinder block are the following dimensions: | |||
The oil holes must be aligned at the correct angle when the bearings are installed. Refer to Specifications, "Cylinder Block" for the correct angle. | |||
A | - | - | Distance is |
B | - | - | Distance is |
C | - | - | Distance is |
D | - | - | Distance is |
E | - | - | Distance is |
F | - | - | Distance is |
G | - | - | Distance is |
H | - | - | Distance is |
K | - | - | Distance is |
Caterpillar Information System:
C18 Marine Engines Turbocharger - Remove and Install
C18 Marine Engines Electronic Unit Injector Sleeve - Remove and Install
3516B Engine for the MT4400D Off-Highway Truck Fuel Injector
C18 Marine Engines Electronic Unit Injector - Remove and Install
G3516C and G3516E Gas Engines Cylinder Block
G3516C and G3516E Gas Engines Cylinder Block
G3500B Engines Crankshaft
3516B Engine for the MT4400D Off-Highway Truck Turbocharger
2013/08/21 A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500, G3500, 3600, G3600, and C280 Engines {1317}
2012/09/27 A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500 Machine Engines {1317}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Lubricant Viscosities
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Bearing (Earlier) - Replace
C18 Marine Engines Inlet and Exhaust Valve Springs - Remove and Install
C18 Marine Engines Inlet and Exhaust Valves - Remove and Install
2012/05/21 Viewing the Electronic Thermostat Position via ET on C175 Engines {135V, 7610}
C18 Marine Engines Inlet and Exhaust Valve Guides - Remove and Install
C18 Marine Engines Inlet and Exhaust Valve Seat Inserts - Remove and Install
2012/05/21 New Clamping for the Jacket Water Bypass Tube on Certain 3500 Engines {1380, 7553}
3512C and 3516C Marine Propulsion Engines Speed Control - Test
G3500 Generator Sets Fluid Recommendations
2012/05/23 Activation Password Is Now Required For Touchscreens Of Uninterruptible Power Supplies {7451}
G3512E Generator Set Engines Engine Oil Pan
C7.1 Industrial Engine Product Description - Engine and Aftertreatment
G3516C and G3516E Gas Engines Water Pump