A Stainless Steel Braided Hose Is Used for Certain G3500 Engine Fuel Heaters {1380}
- Engine:
- G3508 (S/N: 9TG1-UP)
- Petroleum Engine:
- G3520B (S/N: TPC1-UP)
- G3508B (S/N: RBK1-UP)
- G3512 (S/N: 7NJ1-UP)
- G3512B (S/N: JHH1-UP)
- G3516 (S/N: 4EK1-UP)
- G3516B (S/N: JEF1-UP)
- G3520B (S/N: GLF1-UP)
Description of Change: The former hose has a synthetic rubber casing. The new hose with a stainless steel braided cover is more rugged and more resistant to heat.
Adaptable To:
Show/hide table
Illustration 1 | g02950417 |
(1) 382-1407 Hose As |
The new 382-1407 Hose As replaces the former 318-2853 Hose As, which is canceled.
The new 382-1407 Hose As is adaptable to the above engines back to first production.
The new 382-1407 Hose As is effective with the following serial numbers:- RBK01110
- JHH01013
- JEF01441
- GLF00127
Caterpillar Information System:
Thermal Spray Procedures for Wheel Loader Trunnion {0679, 3268} Thermal Spray Procedures for Wheel Loader Trunnion {0679, 3268}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284} Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268} Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
C175-16 Locomotive Engine Fuel Rail Pressure Is Low
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073} Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Exhaust Manifold (I.D. ; O.D.){0679, 1059} Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209} Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
2012/03/28 A New Coolant Conditioner Is Now Available {1350, 1352, 1395}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127} Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
2012/03/28 A New Coolant Conditioner Is Now Available {1350, 1352, 1395}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135} Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
3512C and 3516C Marine Auxiliary Engines Coolant Level - Test
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284} Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Differential Case - Housing Face & Pinion Thrust Face {3283} Thermal Spray Procedures for Differential Case - Housing Face & Pinion Thrust Face {3283}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284} Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215} Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215} Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160} Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162} Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for OHT Rear Spindles {0599, 0679, 4006, 4205} Thermal Spray Procedures for OHT Rear Spindles {0599, 0679, 4006, 4205}
Thermal Spray Procedures for OHT and WTS Rear Wheel - Bearing Bores {0679, 4201} Thermal Spray Procedures for OHT and WTS Rear Wheel - Bearing Bores {0679, 4201}
Thermal Spray Procedures for OHT Front Spindles {0679, 4006, 4205} Thermal Spray Procedures for OHT Front Spindles {0679, 4006, 4205}
2012/03/26 New Software Is Used on Certain C18 Industrial Engines {1901, 1920}
3512C and 3516C Marine Auxiliary Engines Data Link - Test