Fuel Injector
Show/hide table
Illustration 1 | g03368653 |
Show/hide table
Specification for 344-2927 Fuel Injector Gp | |||
Item | Qty | Part | Specification Description |
(3) | 2 | 8T-2223 Bolts | Note: Replace the bolts each time the bolts are removed. |
(6) | 2 | ||
- | - | - | Use the following special instruction in order to tighten the bolts of injectors and high-pressure line components: |
1. Apply clean engine oil to the collar of the tube joint. | |||
2. Loosen bolts (3) and (6). Then slide collar away from both ends of fuel line (2). | |||
3. Remove the fuel line (2) without contacting the ends of the fuel lines with parts on the engine. | |||
4. Install the injector (4). | |||
5. Tighten 8T-0106 Bolt (1) to a torque of |
|||
6. Loosen 8T-0106 Bolt (1) from the injector (4). | |||
7. Lubricate the Collars with clean engine oil. | |||
8. Before assembly, lubricate both ends of the fuel lines on the sealing surface (2) with clean engine oil. | |||
9. Assemble the fuel lines into the head and rail (5) without contacting the ends of the fuel lines with parts on the engine. | |||
10. Hand tighten the new bolts (3). Then hand tighten the new bolts (6). | |||
11. Tighten 8T-0106 Bolt (1) of the injector to a torque of |
|||
12. Evenly, tighten the bolts (3) to a torque of |
|||
13. Evenly, tighten the bolts (6) to a torque of |
|||
14. Tighten 8T-0106 Bolt (1) of the injector to a torque of |
|||
15. Again, evenly tighten the bolts (3) and (6) to a torque of |
|||
16. Again, evenly tighten the bolts (6) to a torque of |
Caterpillar Information System:
C175-16 Marine Propulsion Engines Exhaust Manifold
C175-16 Marine Propulsion Engines Exhaust Manifold
C175-16 Marine Propulsion Engines Exhaust Manifold
C175-16 Marine Propulsion Engines Exhaust Manifold
C175-16 Marine Propulsion Engines Exhaust Manifold
C175-16 Marine Propulsion Engines Fuel Injection Pump
C27 and C32 Generator Sets Additional Messages
2012/03/29 A Repair Option Is Available for Valve Cover Isolation Seals On Certain C9.3 Engines {1107, 7555}
C175-16 and C175-20 Generator Set Engines Gear Group (Front)
C175-16 Marine Propulsion Engines Gear Group (Front)
C175-16 Marine Propulsion Engines Gear Group (Front)
2012/03/15 New Guidelines For Cleaning Backup Alarms on Certain Cat Products {7406}
Cracking of Terminal Box Panels On Certain G3508 50Hz Generator Sets{1205, 4460} Cracking of Terminal Box Panels On Certain G3508 50Hz Generator Sets{1205, 4460}
C27 Industrial Engine and C27 Locomotive Engine Engine Speed Control - Remote
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070} General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
3512C and 3516C Marine Auxiliary Engines Coolant Level Is Low
C280 Marine and Petroleum Engines Aftercooler Coolant Temperature Is High
C175-16 Locomotive Engine Coolant Contains Fuel
3516B Generator Set Engines with Dynamic Gas Blending Coolant Contains Oil
C175-16 Locomotive Engine Coolant Pressure Is Low
C175-16 Marine Propulsion Engines Exhaust Temperature Is High
C175-16 Locomotive Engine Aftercooler Coolant Pressure Is Low
3512C and 3516C Marine Auxiliary Engines Oil Temperature Is High
C175-16 Marine Propulsion Engines Coolant Temperature Is High