Remote Status Panel
Show/hide table
| |
| Illustration 1 | g02820679 |
|
(1) "Bypass unavailable"
(2) "UPS notice" (3) "On-bypass" (4) "Discharging" (5) "UPS overload" (6) "Low DC voltage" (7) "UPS alarm" (8) "Off-line" (9) Lamp test switch (10) Alarm silence | |
The remote status panel allows the user to monitor various functions through use of eight status lights.
Show/hide table
| Remote Status Panel
Specifications |
|
|---|---|
| Description | Value |
| Input Voltage | |
| Input voltage to panel | 15 to 45 VDC |
| Power | |
| Power requirements | 6 W maximum |
| Physical Dimensions | |
| Height | |
| Depth | |
| Width | |
| Weight | |
| Distance from UPS | less than |
| Environmental Specifications | |
| Horn (Output) | 80 dB(A)
nominal |
| Temperature range | |
| Humidity | 0 to 100% relative humidity |
| Emissions and Immunity | IEC 801-2
IEC 801-3 IEC 801-4 EN 5082-2 89/392/EEC Certification (EEC) |
Connecting to the Remote Status Panel
The system is designed for flush mounting or surface mounting in a panel box. The system uses 18 AWG or larger wire. The wire will consist of three conductors. The wire consists of a data conductor, a ground conductor, and a power conductor. There are 14 screw connections on the back of the status panel that are Labeled. Refer to Table 2.
Show/hide table
| Connections (Remote Status Panel) | Connections (System Input/Output Daughter board) (J5) |
|---|---|
| Terminal 1 "+24 VDC" | Connection 1 |
| Terminal 2 "Serial data in" | Connection 5 |
| Terminal 3 "Spare" | |
| Terminal 4 "Spare" | |
| Terminal 5 "Spare" | |
| Terminal 6 "Jumper to 7" | |
| Terminal 7 "Ground" | Connection 3 |
| Terminal 8 "Spare" | |
| Terminal 9 "Jumper to 6" | |
| Terminal 10 "Spare" | |
| Terminal 11 "Spare" | |
| Terminal 12 "Lamp test (1)" | |
| Terminal 13 "Horn silence (1)" | |
| Terminal 14 "Horn output (1)" |
Show/hide table
| |
| Illustration 2 | g02833162 |
|
Remote status panel J5 connector orientation (15) Pin 5 (16) Pin 4 (17) Pin 3 (18) Pin 2 (19) Pin 1 | |
Caterpillar Information System:
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738} 146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781} Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727} 127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057} Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Water Temperature Regulator
C13 Engine for Combat and Tactical Vehicles Engine Oil Pressure Sensor
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Fan Drive
C7 Petroleum Engine Coolant Temperature Regulator - Replace
3500 Industrial Engines Engine Trunnion
3500 Industrial Engines Fuel Filter
3516B Engine for the MT4400D Off-Highway Truck Accessory Drive (Upper Right Hand)
3500 Industrial Engines Fuel Filter
3500B Engines for Caterpillar Built Power Modules Fuel Filter
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Generator Set Start Module
Product Identification Numbers (PIN) Location Guide Load, Haul, Dump
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Information Plate
3500B and 3500C Marine Engines Fuel Injector
3516B Engine for the MT4400D Off-Highway Truck Cover Group (Front Housing)
3500 Engines Cylinder Head
3500B Engines for Caterpillar Built Power Modules Cylinder Head
3508B Industrial Engines Cylinder Head
Product Identification Numbers (PIN) Location Guide Forest Machine
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove and Install