Bucket Cylinder
Show/hide table
Illustration 1 | g02730793 |
Show/hide table
Specification for 341-2814 Bucket Cylinder and Seal Gp | |||
Item | Qty | Part | Specification Description |
1 | 1 | 241-7382 Bushing | Inside diameter before assembly Installation depth is |
2 | 12 | 8T-1447 Bolt | Torque to |
A | 1 | 352-1100 Cylinder As | Bore is |
B | 1 | 352-1106 Rod As | Diameter is |
3 | 1 | 357-5712 Bushing | During press fit, insert the bushing with the taper side first.
Bore before assembly is Installation depth is |
4 | 2 | 3B-8489 Grease Fitting | Torque to |
5 | 1 | 096-4402 Bushing | Outside diameter before assembly is Thickness is |
6 | 1 | 247-8885 Piston | Torque to |
7 | 1 | 096-3216 Socket Setscrew | Torque to After tightening the socket setscrew, stake the socket setscrew in two places. |
Caterpillar Information System:
320E and 323E Excavators Machine System Specifications Stick Cylinder
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
2012/03/13 A New Piston Is Used in Certain C18 Engines {1214, 1225}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920} Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
2011/12/05 New Heat Exchanger Groups and Spacers Are Used on Certain C18 Commercial and Marine Engines {1379}
2011/11/11 New Heat Exchanger Groups and Spacers Are Used on Certain C32 Marine Engines {1379}
320E and 323E Excavators Machine System Specifications Swivel
320E and 323E Excavators Machine System Specifications Travel Motor Guard
2011/12/14 A New Engine Oil Cooler Bypass Is Used for C175-16 Engines {1307}
2011/10/19 Improved Bolts and Washers Along with a New Procedure Are Used to Fasten the Pilot to the Lockup Clutch Housing {3101, 7553}
3516C Marine Engine Engine Operation
2011/12/23 Special Instruction, REHS7409, "Initial Start-Up of CG137 and G3300B Engines" Is Available {1000}
320E and 323E Excavators Machine System Specifications Bucket Cylinder
320 GC, 320 and 323 Excavator Machine Systems Specifications Track
320E and 323E Excavators Machine System Specifications Relief Valve (Boom Lowering Control Device)
2011/10/20 New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
349F and 352F Excavators Machine System Specifications Hoist Solenoid Valve - Boom/Stick Regeneration
Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay That is used on C280 Marine Engines{1408, 1453, 7451} Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay That is used on C280 Marine Engines{1408, 1453, 7451}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor (Implement Pilot Oil)
Customer Connections for G3304B and G3306B Engines {1408, 5258} Customer Connections for G3304B and G3306B Engines {1408, 5258}
2012/01/03 Improvements Have Been Made to Manufacturing Processes of the Piston for the Track Adjuster on Certain Excavators and Mobile Hydraulic Power Units {4157}
2011/10/20 Special Instruction, REHS7410, "Customer Connections for G3304B and G3306B Engines" Is Available {1408, 5258}
3512C and 3516C Marine Auxiliary and Generator Set Engines Engine Air Cleaner Element (Single Element) - Inspect/Replace
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Guidance Terms