Engine Oil Filter Base - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 185-3630 | Strap Wrench As | 1 |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to remove engine oil filter (2).
- Remove bolts (1).
Show/hide table
Illustration 2 g02434882 - Remove bolts (4) and bolt (5). Repeat for the other side.
- Remove engine oil filter base (3) and the O-ring seals.
Show/hide table
Illustration 1 | g02434781 |
Caterpillar Information System:
Assembling and Installing a Selective Catalytic Reduction (SCR) Module for Certain 3516C Generator Sets{1050, 108D, 7279} Assembling and Installing a Selective Catalytic Reduction (SCR) Module for Certain 3516C Generator Sets{1050, 108D, 7279}
2011/02/24 Procedure for Improving Battery Life on Generator Sets {1401}
2011/05/16 Improved Software is Now Used for the TH48-E80 Petroleum Transmissions and the SPF343C Pumpers {7620}
C13, C15, and C18 Tier 4 Interim Engines Electrical Power Supply - Test
C6.6 Industrial Engine Flywheel - Remove - Equipped with Rear Power Take-Off
C6.6 Industrial Engine Flywheel - Install - Equipped with Rear Power Take-Off
3516C and C175-16 Engines Selective Catalytic Reduction Component Location
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Symbols
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Acronyms
C15 Petroleum Engines Exhaust Manifold - Remove and Install
CT660 CX31 and CX31 HT On Highway Truck Power Train Electronic Control System Wiring Harness (Short Circuit) - Test
CT660 CX31 and CX31 HT On Highway Truck Power Train Electronic Control System Wiring Harness (Open Circuit) - Test
C15 Petroleum Engines Engine Oil Filter Base - Install
C15 and C18 Industrial Engines Clean Emissions Module
C15 Petroleum Engines Engine Oil Cooler - Remove
CX31 and CX31 HT On-Highway Transmissions Retarder Operation
CX31 and CX31 HT On-Highway Transmissions Transmission Operation
CX31 On-Highway Transmission Lubricant Viscosities
CX31 and CX31 HT On-Highway Transmissions Capacities (Refill)
2011/02/24 Wheel Loader Bucket Lifting Point Color Change {6001, 6101, 6102, 6104, 6110, 6131, 6132, 6529, 6531, 6704}
C15 Petroleum Engines Engine Oil Cooler - Install
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Pressure Sensor (Brake Oil Accumulator)
C8.7 Marine Engines Battery - Test
UPSB505 Uninterruptible Power Supply Circuit Breaker Recommendation