2011/01/10 Caterpillar


A New Waste Gate for the Turbocharger Is Now Being Used on the Certain C13 Industrial Engines {1052, 1053, 1057, 1940}

Usage:

C13 LGK
Industrial Engine:
C13 INDUSTRIAL (S/N: LGK1-UP)
Engine News SEBD9688, October 2011, "A New Waste Gate for the Turbocharger Is Now Being Used on the Certain C13 Industrial Engines ". Disregard this article. Refer to the article that follows for updated information.

Description of Change: A new waste gate for the turbocharger is now used on the engines that are listed above. The new waste gate is a more robust design that will withstand high vibration levels.

Adaptable To: The new 362-4782 Actuator Kit is adaptable back to the first production of the listed machines. The change is effective at the factory with the engine serial number LGK22683-UP.

Table 1
OEM     PA     Engine     Application     Prefix    
NOELL     9352     C13     Industrial     LGK    

Table 2
Arrangement     Turbo P/N     Production     Field Service Kit    
236-4575     362-3145     Current     362-4782    
236-4575     20R-0972     Remanufactured     362-4782    
Refer to Table 1 and Table 2 for reference information.

Caterpillar Information System:

3500 Engines Engine Oil Sequence Valves - Remove and Install
349F and 352F Excavators Machine System Specifications Accumulator (Pilot)
349F and 352F Excavators Machine System Specifications Relief Valve (Main)
349F and 352F Excavators Machine System Specifications Check Valve
Training Materials {0314, 0374, 4150} Training Materials {0314, 0374, 4150}
CX31 On-Highway Transmission Retarder - Install
3516C Locomotive Engines Flywheel Housing - Install
CX31 On-Highway Transmission Retarder - Remove
3516C Locomotive Engines Flywheel Housing - Remove
Replacing the Fuel Injection Pump on Certain C9.3 Engines {1251, 1290} Replacing the Fuel Injection Pump on Certain C9.3 Engines {1251, 1290}
3508C, 3512C and 3516C Locomotive Engines Engine Oil Lines
C7 Marine Engine Injector Bolt Torque - Inspect
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300} Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Grade Control Configuration
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Machine Monitoring System Configuration
C7 Engines for Combat and Tactical Vehicles Grounding Stud - Inspect/Clean/Tighten
349F and 352F Excavators Hydraulic System Relief Valve (Counterweight Cylinder) - Test and Adjust
C7 Engines for Combat and Tactical Vehicles Severe Service Application
3406E and C15 Marine Engines Fuel Injector - Check
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300} Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
349F and 352F Excavators Machine System Specifications Check Valve (Return Lines)
349F and 352F Excavators Machine System Specifications Pump Lines (Main)
349F and 352F Excavators Machine System Specifications Boom Cylinder Lines
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950} Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.