Electrical Connectors
Connectors for the Electronic Control Module (ECM)
Show/hide table
Illustration 1 | g02141086 |
Locations of the components at the ECM (1) P2 ECM connector (ECM side) (2) P1 ECM connector (ECM side) (3) P2 ECM connector (harness side) (4) P1 ECM connector (harness side) (5) ECM |
Show/hide table
Illustration 2 | g02175627 |
Terminal locations for the engine interface connectors (40-pin connector) (6) Connector for the engine harness (7) Connector for the genset harness |
Show/hide table
Illustration 3 | g02141201 |
Show/hide table
Illustration 4 | g01240891 |
Analog sensor connector (active sensor) |
Show/hide table
Illustration 5 | g01241538 |
Analog sensor connector (passive sensor) |
Show/hide table
Illustration 6 | g01155187 |
Engine speed/timing connector |
Service Tool Connector for Caterpillar Electronic Technician
Show/hide table
Illustration 7 | g01431295 |
Termination Resistor for the CAN Data Link
Show/hide table
Illustration 8 | g01355248 |
Caterpillar Information System:
C9.3 Engines for Caterpillar Built Machines Solenoid Valve (ARD Main Fuel) - Remove and Install
349F and 352F Excavators Machine System Final Drive
2011/04/15 New Fuel Level Senders are Now Available for Certain Generator Sets {1273, 1439, 7060}
3512C Oil Well Service Engines Before Starting Engine
349F and 352F Excavators Machine System Oil Filter (Return) - Case Drain Filter
349F and 352F Excavators Hydraulic System Hydraulic Oil Cooler
2011/02/10 New Valve Stem Seals Are Available for Certain C13 and C15 On-Highway Engines {1100, 7555}
C27 and C32 Tier 4 Engines Flywheel Housing
C27 Generator Set Engines Sensor Supply - Test
242-3567 Variable Crimp Die Bowl{0684} 242-3567 Variable Crimp Die Bowl{0684}
349F and 352F Excavators Hydraulic System Hydraulic Tank and Filter
C27 and C32 Tier 4 Engines Air Shutoff
C27 Generator Set Engines Starting - Test
797F and 797F XQ Off-Highway Trucks Machine Systems Piston Pump (Hydraulic Fan, Steering) - Disassemble
797F and 797F XQ Off-Highway Trucks Machine Systems Piston Pump (Hydraulic Fan, Steering) - Assemble
797F and 797F XQ Off-Highway Trucks Machine Systems Piston Pump (Brake Cooling) - Disassemble
797F and 797F XQ Off-Highway Trucks Machine Systems Piston Pump (Brake Cooling) - Assemble
C27 and C32 Tier 4 Engines Valve Mechanism Cover
C27 and C32 Engines for Caterpillar Built Machines Air Lines
120 Motor Graders Relief Valve (Secondary Steering)
349F and 352F Excavators Machine System Displacement Change Valve
C27 and C32 Tier 4 Engines Exhaust Diffuser Adapter
2010/07/08 New Gauges Available {7450}
G3406 and G3412 Generator Set Engines Engine Oil Lines