Inlet Manifold Air Pressure Sensor
Show/hide table
图 1 | g03355050 |
Show/hide table
274-6718 压力传感器总成的技术规格 | |||
项目 | 数量 | 零件 | 技术规格说明 |
1 | - | - | 压力传感器总成的最终安装扭矩为 |
- | - | - | 工作电压为 5.0 ± 0.5 VDC。 |
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Fan Drive
C15 and C18 Engines Fuel Priming Pump - Replace
320E and 323E Excavators Cooling System Coolant Level - Check
320E and 323E Excavators Cooling System Coolant Extender (ELC) - Add
C4.4 Industrial Engine Turbocharger - Series Turbochargers
C11 and C13 Engines Muffler
C4.4 Industrial Engine Turbocharger - Single Turbocharger
C4.4 Industrial Engine Temperature Sensor (NOx Reduction System)
C11 and C13 Engines Engine Oil Cooler
C4.4 Industrial Engine Exhaust Gas Valve (NRS)
325D and 329D Excavators Joystick Controls Alternate Patterns
C13, C15, and C18 Tier 4 Final Engines Air Lines
2010/05/19 An Improved Water Line Is Now Used on Certain Commercial Engines {1355, 1380, 1393}
2010/07/30 New Cage Assembly Is Used on TH48-E80 Petroleum Transmissions {3160}
C11 and C13 Engines Fuel Injector
C6.6 Industrial Engine Vibration Damper and Pulley
C9.3 Engines for Caterpillar Built Machines Electrical Connectors
C6.6 Industrial Engine Vibration Damper - Check
C15 and C18 Tier 4 Final Engines ARD Fuel System - Test
Reuse Guideline for the Flexible Exhaust Pipe Group on Tier 4 Engines {1061} Reuse Guideline for the Flexible Exhaust Pipe Group on Tier 4 Engines {1061}
C6.6 Industrial Engine Product Lifting - Engine
C7.1 Industrial Engine Product Lifting - Clean Emission Module
2010/05/13 New Flash File for Certain C6.6 Engines {1901, 1920}
325 VM and VH Variable Gauge Undercarriage Track Roller - Remove and Install