Engine Oil Pump
Show/hide table
图 1 | g02983476 |
Show/hide table
161-4113 发动机机油泵总成技术规格 | |||
项目 | 数量 | 零件 | 技术规格说明 |
2 | 1 | 2S-2760 弹簧 | 在测试力下的长度为 测试力为 测试后的自由长度约为 |
3 | 1 | 4N-5273 泵传动轴 | 直径为 长度为 机油泵盖中用于安装泵传动轴衬套的孔径为 |
4 | 1 | 4N-5273 泵传动轴 | 直径为 长度为 机油泵盖中用于安装泵传动轴衬套的孔径为 |
5 | 2 | 1W-7240 齿轮 | 长度为 机油泵体中的孔深度为 |
6 | 1 | 127-6356 泵盖 | 使 8S-6511 衬套 (7) 和泵盖的端面平齐。 |
Show/hide table
图 2 | g02983477 |
(1) 235-1587 泵体 |
Show/hide table
项目 | 数量 | 零件 | 技术规格说明 |
8 | 2 | 8M-8489 定位销 | 定位销在机油泵中的安装深度 (A) 为 |
9 | 2 | 7N-2156 衬套 | 安装衬套,使衬套与机油泵体的外侧平齐。
机油泵体中心线与衬套接头之间的角度为 30 ± 15 度。 安装深度 (C) 为 |
Caterpillar Information System:
C13 Industrial Engines Temperature Sensor (NOx Reduction System) - Cooled Diesel Exhaust Gases
797F Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Assemble
797F Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Disassemble
TH55FT-E70 and TH55FT-E90 Transmissions Component Location
EMCP4.3/4.4 Data Link
797F Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Remove and Install
C9.3 Tier 4 Final Engines Fuel Filter Base
2010/03/22 A Procedure to Properly Torque the Fittings on the Fuel Manifold Group on Certain C13 and C15 On-Highway Truck Engines Is Available {1274, 1380, 1702}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258} Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
2010/10/08 A Slave Relay Should be Used for Customer Connections to EMCP 3 On Certain Generator Sets {4490}
C13 Industrial Engines Pressure Sensor (NRS Absolute)
2010/03/10 A New Screw Is Available for the Rocker Arm Assemblies of Some Machine Engines {1123}
C13, C15, and C18 Tier 4 Interim Engines Configuration Parameters
C11 and C13 Engines Piston and Rings
C175-16 Petroleum Generator Set Engines Monitoring System
2013/01/16 New Liner Seals Are Used and Inserts Are Available for All 3500 Engines {1201}
2010/06/25 New Liner Seals Are Used and Inserts Are Available for All 3500 Engines {1201}
C15 Petroleum Generator Set Engines Speed/Timing Sensor
C13, C15, and C18 Tier 4 Final Engines Boost Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C9.3 Tier 4 Final Engines Belt Tensioner
2010/03/25 An Updated Fuel Pressure Is Used In System Operation, Testing and Adjusting Manuals For C27 and C32 Engines {1250, 1256}
2010/03/25 An Updated Fuel Pressure Is Used In System Operation, Testing and Adjusting Manuals For C27 and C32 Machine Engines {1250, 1256}
EMCP4.3/4.4 Electronic Control Module (Generator Set)