Motor Rotating (Brake Cooling) - Extra Retarding
Show/hide table
Illustration 1 | g01954239 |
(1) As required, use the following shims in order to obtain the dimension (A):
- (A) Dimension ...
99.4 to 99.5 mm (3.91 to 3.92 inch) - Thickness of the 9T-2581 Shim ...
0.10 mm (0.004 inch) - Thickness of the 9T-2581 Shim ...
- Thickness of the 9T-2582 Shim ...
0.3 mm (0.01 inch)
Note: Apply 4C-4030 Thread Lock Compound to the threads of the screws (2).
(2) Torque for seven screws ...
(3) 166-7410 Spring
- Free length ...
36.50 mm (1.437 inch) - Outside diameter ...
15.30 mm (0.602 inch) - Outside diameter ...
(4) As required, use any one of the following shims in order to obtain the clearance (B):
- (B) Clearance ...
0.20 ± 0.05 mm (0.008 ± 0.002 inch) - Thickness of the 141-0247 Shim ...
3.50 mm (0.138 inch) - Thickness of the 141-0247 Shim ...
- Thickness of the 141-0248 Shim ...
3.60 mm (0.142 inch)
- Thickness of the 141-0249 Shim ...
3.70 mm (0.146 inch)
- Thickness of the 141-0250 Shim ...
3.80 mm (0.150 inch)
- Thickness of the 141-0252 Shim ...
4.00 mm (0.157 inch)
Caterpillar Information System:
797F and 797F XQ Off-Highway Truck Power Train Gear Pump (Brake, Rear Axle Lubrication) - Extra Retarding
G3304B and G3306B Engines Inlet and Exhaust Valves - Remove and Install
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System Fill Time for the Transmission Clutch - Calibrate
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System Engagement Pressure for the Transmission Clutch - Calibrate
793F and 797F Off-Highway Trucks Power Train Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
G3304B and G3306B Engines Troubleshooting Data Sheet
G3304B and G3306B Engines Valve Lifter - Install
G3304B and G3306B Engines Welding Precaution
G3304B and G3306B Engines Valve Lifter - Remove
2009/07/27 Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
G3304B and G3306B Engines Rocker Shaft - Assemble
797F and 797F XQ Off-Highway Truck Power Train Oil Filter (Final Drive)
797F and 797F XQ Off-Highway Truck Braking System Piston Pump (Brake Cooling) - Extra Retarding
CD44B and CD54B Vibratory Asphalt Compactors Alternator - Inspect
2009/08/03 Pistons and Piston Rings {1225, 1225}
G3304B and G3306B Engines Inlet and Exhaust Valve Guides - Remove and Install
G3304B and G3306B Engines Fuel Energy Content Problem
G3512E and G3520E Generator Set Engines Air/Fuel Ratio Control - Adjust
G3304B and G3306B Engines Inlet and Exhaust Valve Seat Inserts - Remove and Install
CG137-08 and CG137-12 Industrial Engines Air/Fuel Ratio Problem
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System Transmission Does Not Automatically Shift Into Neutral
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System Transmission Does Not Automatically Shift Back Into Gear
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System Transmission Does Not Respond to Shift Selector
Procedure for Removing and Installing the 343-2886 Control Valve Cover on G3500 Engines{1250, 1740, 5137} Procedure for Removing and Installing the 343-2886 Control Valve Cover on G3500 Engines{1250, 1740, 5137}