Engine Oil Filter and Oil Filter Base - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7573 | Link Bracket | 1 |
Show/hide table
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin. Be sure that the engine and components are cool enough to touch with your bare hand prior to performing any service work. |
- Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Show/hide table
Illustration 1 g02127011 Show/hide tableIllustration 2 g02127019 - Remove cover (1) in order to remove oil filter element (2). Repeat this step for the remaining oil filter and base.
Show/hide table
Illustration 3 g02127025 - Disconnect harness assembly (3). Disconnect hose assembly (4). Remove clip (5) and position the tube assembly out of the way.
- Disconnect tube assemblies (6). Remove clamps (7).
Show/hide table
Illustration 4 g02127044 - Attach Tooling (A) and a suitable lifting device onto oil filter and base (8). The weight of oil filter and base (8) is approximately
73 kg (160 lb) . - Remove bolts (9). Remove oil filter and base (8).
- Install engine oil filter and base (8) in the reverse order of removal.
Caterpillar Information System:
C7.1 Industrial Engine Gauges and Indicators
797F and 797F XQ Off-Highway Truck Hydraulic System Truck Body Mounting
C13 Engines for Caterpillar Built Machines Electronic Unit Injector Rocker Arm
793F Off-Highway Truck Machine Systems Seat - Remove and Install
G3304B and G3306B Engines Crankshaft Front Seal and Wear Sleeve - Install
C15 and C18 Industrial Engines Inlet and Exhaust Valves - Remove and Install
G3304B and G3306B Engines Crankshaft Front Seal and Wear Sleeve - Remove
C15 and C18 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
G3304B and G3306B Engines Water Directors - Remove and Install
C9.3 Marine Propulsion Engine Decommissioning and Disposal
C13 Tier 4 Final Engines Electronic Unit Injector Mechanism
G3304B and G3306B Engines Flywheel Housing - Install
C175-16 and C175-20 Generator Set Engines Fuel System Operation
793F Off-Highway Truck Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
C7.1 Industrial Engine and Generator Set Throttle Setup
G3304B and G3306B Engines Crankshaft Rear Seal and Wear Sleeve - Remove
G3304B and G3306B Engines Crankshaft Rear Seal and Wear Sleeve - Install
C15 and C18 Industrial Engines Camshaft Gear - Remove and Install
C13 Tier 4 Final Engines Rocker Shaft
C9.3 Engines for Caterpillar Built Machines Fuel Injection Pump - Remove and Install
793F Off-Highway Truck Engine Supplement Water Pump (Engine) - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
797F and 797F XQ Off-Highway Truck Braking System Gear Motor (Rear Axle Lubrication)
797F and 797F XQ Off-Highway Truck Steering System Bypass Switch (Hydraulic Fan, Steering Oil Filter)