Speed Sensor (Transmission) - Torque Converter Output
Show/hide table
Illustration 1 | g01725618 |
(1) Tighten the sensor to the following torque. ... 37 ± 4 N·m (27 ± 3 lb ft)
Operating temperature range ... −40° to 120°C (−40° F to 248°F)
Max operating frequency ... 15 kHz
Caterpillar Information System:
2008/11/17 The 6V-4022 Fuel Injector Tester Is not Available {1251, 1254, 1290, 1713}
TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages Speed Sensor (Transmission) - Engine Output
2008/11/17 The 6V-4022 Fuel Injector Tester Is not Available {1251, 1254, 1290, 1713}
G3520C and G3520E Generator Set Engines Vibration Damper - Remove
G3520C and G3520E Generator Set Engines Vibration Damper - Assemble
2008/11/17 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
G3520C and G3520E Generator Set Engines Vibration Damper - Disassemble
2008/12/01 Water Temperature Regulator {1355, 1380}
793F and 797F Off-Highway Trucks Chassis Electronic Control System System Schematic
G3500B Engines Camshaft
G3500B Engines Configuration Parameters
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Main Hydraulic Pump and Pump Drive Coupling - Install
G3500B Engines Speed/Timing - Test
G3520B Engines Stub Shaft (Front)
3500 Engines with EUI Option Turbocharger
3500 Engines with EUI Option Turbocharger
2008/11/17 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
3306C Engines for Caterpillar Built Machines Turbocharger
2008/11/01 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17 Calibration Fluid for Fuel Nozzle Test Equipment Is Available {0782, 1251, 1254, 1290, 1713}
2008/11/17 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/01 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
C15 and C18 Generator Set Engines Flywheel - Install
Roll Over Protective Structure and Falling Object Protective Structure Identification Film Retention{7000, 7405, 7557} Roll Over Protective Structure and Falling Object Protective Structure Identification Film Retention{7000, 7405, 7557}