TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Caterpillar

Illustration 1	g01526715

Note: Lubricate all seals lightly with lubricant that is being sealed.

(1) Tighten the components to the following torque. ... 30 ± 4 N·m (22 ± 3 lb ft)

(2) Align top of tooth with centerline of hole. Insert the sensor until firm contact with the tooth is made. After contact, back out the sensor by 1/2 ± 1/8 turns. Torque the retaining nut to 25 ± 5 N·m (18 ± 4 lb ft).

(3) Remove the nipple from the valve group. Assemble the adapter and tighten to 14 ± 4 N·m (10 ± 3 lb ft). Reinstall the nipple into the adapter and tighten to 14 ± 4 N·m (10 ± 3 lb ft).

(4) Tighten to the following torque. ... 184 ± 14 N·m (136 ± 10 lb ft)

(5) Tighten the bolt to the following torque. ... 15 ± 3 N·m (11 ± 2 lb ft)