An Improved Alternator Belt Guard Is Now Used {7174}
- Marine Engine:
- 3176C MARINE (S/N: 6BW1-UP)
- 3196 MARINE (S/N: 2XR1-UP)
- C-12 MARINE (S/N: 9HP1-UP)
- C12 MARINE (S/N: C1Z1-UP)
Description of Change: A new belt guard is now used on the engines that are listed above. The new more rugged belt guard incorporates riveted blocks with isolators that eliminate vibration at all mounting locations. The newly designed belt guard eliminates the possibility of cracking at the mounting tabs which can result in contact with the belt.
Adaptable To:
Show/hide table
129-5640 Belt Guard Gp Parts List     | ||
Part Number     | Part Name     | Amount     |
8T-9655     | Isolation Mount     | 6     |
116-9259     | Belt Guard Assembly     | 1     |
318-8913     | Belt Guard Assembly     | 1     |
322-4653     | Spacer     | 2     |
325-0947     | Spacer     | 1     |
5P-4116     | Hard Washer     | 4     |
7X-0579     | Hard Washer     | 4     |
8M-9124     | Washer     | 2     |
8T-3647     | Bolt     | 2     |
8T-4200     | Bolt     | 4     |
8T-6912     | Bolt     | 1     |
Show/hide table
Effective Serial Numbers     |
S/N:2XR5103-UP     |
S/N:6BW504-UP     |
S/N:9HP1-UP     |
S/N:C1Z1-UP     |
Caterpillar Information System:
345D, 349D and 349D2 Excavators Hydraulic System Relief Valve (Cushion Crossover) - Anti-Reaction Valves
2008/02/25 A New Oil Filter Group is Now Used on the TH48-E80 Oil/Gas Transmission {3030, 3067}
345D, 349D and 349D2 Excavators Hydraulic System Oil Makeup (Swing System)
C18 Marine and Marine Generator Set Engines Turbocharger
C175-16 and C175-20 Generator Set Engines Crankcase Pressure Is High
C175-16 and C175-20 Engines for Off-Highway Trucks Camshaft
3500 Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
C175-16 and C175-20 Generator Set Engines Oil Contains Fuel
3500B Locomotive Engines Configuration Parameters
C4.4 Industrial Engine Engine Rating Conditions
C4.4 Industrial Engine Engine Rating Definitions
3500C Marine Engines Camshaft
345D, 349D and 349D2 Excavators Hydraulic System Solenoid Valve (Fine Swing) - If Equipped
3176C, 3406E and 3456 Industrial Engines ECM Software - Install
3176C, 3406E and 3456 Industrial Engines Intake Manifold Air Pressure Is High
345D, 349D and 349D2 Excavators Hydraulic System Travel Hydraulic System
SR5 Electric Power Generation Bus Bar - Remove and Install
C175-16 and C175-20 Generator Set Engines Injector Solenoid - Test
The Idle Shutdown Timer May Cause the Engine to Shut Down During Regenerations Initiated with Caterpillar Electronic Technician (ET){108B} The Idle Shutdown Timer May Cause the Engine to Shut Down During Regenerations Initiated with Caterpillar Electronic Technician (ET){108B}
C15 Petroleum Generator Set Engines Speed Sensor
C13, C15, and C18 Generator Set Engines Camshaft
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Crankcase Breather
C175-16 and C175-20 Generator Set Engines Flywheel Housing
3176C, 3406E and 3456 Industrial Engines Sensor Signal (PWM) - Test