Brake Control Valve (Service) - Remove and Install
Start By:
- Connect the steering frame lock.
- Release the system pressure.
- Tilt the cab (partial tilt).
Show/hide table
Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. |
- Remove bolts (1) and the clips.
- Remove tube assemblies (2).
Show/hide table
Illustration 2 g06237752 - Remove adapters (3), (4), and (5).
- Lower the cab.
Show/hide table
Illustration 3 g06237758 - Remove three bolts (7) and brake control valve (service) (6).
Show/hide table
Illustration 1 | g06237709 |
- Install brake control valve (service) (6) in the reverse order of removal.
Caterpillar Information System:
An Improved Mounting for the Tube in the Cooling Lines Group Is Now Used on Certain D Series Wheel Skidders {1071, 1087, 1380} An Improved Mounting for the Tube in the Cooling Lines Group Is Now Used on Certain D Series Wheel Skidders {1071, 1087, 1380}
963K Track-Type Loader Machine Systems General Information (Fan Hydraulic System)
973K Track-Type Loader Machine Systems Cab - Tilt - Full Tilt
D6 XE Track-Type Tractor Systems General Information (Power Train System)
320GC, 320 and 323 Excavators Machine Systems Stick Cylinder - Remove and Install
320GC, 320 and 323 Excavators Machine Systems Boom Cylinder - Remove and Install
320 GC, 320 and 323 Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - High Pressure Line) (Attachment Valves #1, #2, #4
336, 336 GC and 340 Excavator Systems Machine System
A Procedure to Realign Transmission Slide Rails Is Available for Certain D6T and D8T Track-Type Tractors {3256, 3258} A Procedure to Realign Transmission Slide Rails Is Available for Certain D6T and D8T Track-Type Tractors {3256, 3258}
C7.1 Industrial Engine Reference Information
973K Track-Type Loader Engine Supplement Rear Guard - Remove and Install
320, 323 Excavator Engine Supplement Engine Oil Cooler - Remove and Install
C32 Marine Engines Expansion Tank (SCAC) - Remove and Install
963K Track-Type Loader Machine Systems Location of Components (Fan Hydraulic System)
963K Track-Type Loader Machine Systems Electronic Control (Fan Hydraulic System)
973K Track-Type Loader Power Train Gear Pump (Charge) - Remove and Install
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Pilot Oil Accumulator (Dead Engine Lower) - Remove and Install
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Arch Cylinder - Remove and Install
336, 336 GC and 340 Excavator Systems Main Hydraulic Pump
D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
MD6250 Rotary Drill Capacities (Refill)
336, 336 GC and 340 Excavator Systems Pump Control (Main Hydraulic) - Main Pump Regulator
992K Wheel Loader System Schematic