Fuel Transfer Pump - Remove
Removal Procedure
Start By:
- Remove the fuel manifold. Refer to Disassembly and Assembly, "Fuel Control Manifold (ARD) - Remove".
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (1) and remove nut (2) .
Show/hide table
Illustration 1 | g01361043 |
- Remove nut (3) and remove bracket (4) .
- Remove nut (6) and remove bracket (5) .
- Remove bolts (7) .
Show/hide table
Illustration 2 | g01361067 |
- Remove studs (9) and remove fuel transfer pump (8) .
Caterpillar Information System:
C3.4 IND Industrial Engine Engine Oil and Filter - Change
C4.4 (Mech) Industrial Engine Emissions Certification Film
C9 On-highway Engine Fuel Control Manifold (ARD) - Install
C9 Agricultural Engine for Challenger Tractors Diagnostic Trouble Code List
C4.4 Engines for Caterpillar Built Machines Starter Motor
C4.4 Engines for Caterpillar Built Machines Alternator
C4.4 Engines for Caterpillar Built Machines Belt Tension Chart
C3.4 IND Industrial Engine Battery or Battery Cable - Disconnect
C4.4 Engines for Caterpillar Built Machines Crankshaft Pulley
C4.4 (Mech) Industrial Engine Plate Locations and Film Locations
C32 Marine and Auxiliary Marine Engines Fuel Filter Base
C9 On-highway Engine Fuel Control Manifold (ARD) - Remove
345D, 349D and 349D2 Excavator Machine System Specifications Relief Valve (Crossover)
C9 Agricultural Engine for Challenger Tractors Electronic Service Tools
CX35 On-Highway Transmission Maintenance Log
C9 On-highway Engine Fuel Transfer Pump - Install
3176C Engine for Caterpillar Built Machines Cylinder Is Noisy
C9 Agricultural Engine for Challenger Tractors Engine Cranks but Does Not Start
C32 Marine Engines Fuel Priming Pump - Remove and Install
Starting Motor - Delco 50-MT Component Description
Starting Motor - Delco 50-MT General Information
C9 On-highway Engine Cylinder Block Cover - Remove and Install
Starting Motor - Delco 50-MT General Information
Starting Motor - Delco 50-MT Service Tools