Exhaust Elbow - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 138-7573     | 连杆支架     | 2     |
开始:
- 拆下涡轮增压器。 请参阅拆解和组装, "涡轮增压器 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 如有必要,松开排气旁通阀的卡箍组件。 断开波纹管组件。
- 将工具 (A) 和适当的提升设备连接在排气弯管 (1) 上。 排气弯管 (1) 的重量约为 45 kg (100 lb)。
Show/hide table
图 1 | g01353778 |
- 拆下螺栓 (2) 。 拆下排气弯管 (1) 。
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 138-7573     | 连杆支架     | 2     |
B     | 5P-3931     | 防粘结剂     | -     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将工具 (A) 和适当的提升设备连接在排气弯管 (1) 上。 排气弯管 (1) 的重量约为 45 kg (100 lb)。 将排气弯管 (1) 置于支撑架上并安装螺栓 (2) 。
Show/hide table
图 2 | g01353778 |
- 如有必要,将工具 (B) 涂抹到螺纹、轴承表面以及排气旁通阀的卡箍组件的内表面上。 连接排气旁通阀的波纹管组件。 拧紧卡箍组件至扭矩为 25 ± 6 N·m (18 ± 4 lb ft)。
End By: 安装涡轮增压器。 请参阅 拆解和组装, "涡轮增压器 - 安装"。
Caterpillar Information System:
C11 and C13 On-Highway Engines Gear Group (Rear)
3508C, 3512C and 3516C Marine Engines Air Inlet Manifold - Remove and Install
C9 On-highway Engine Fuel Priming Pump - Remove and Install
2007/03/05 A New Fuel Indicator is Now Available {7456}
C3.4 Engines for Caterpillar Built Machines Connecting Rod
C3.4 Engines for Caterpillar Built Machines Crankshaft Seals
C3.4 Engines for Caterpillar Built Machines Cylinder Block
Diesel Particulate Filter Monitor System Information - Download
C3.4 Engines for Caterpillar Built Machines Camshaft
C4.4 (Mech) Industrial Engine Fuel System
C3.4 IND Industrial Engine Model View Illustrations
C9 On-highway Engine Engine to Transmission Adapter
C3.4 Engines for Caterpillar Built Machines Piston and Rings
C4.4 (Mech) Industrial Engine Fuel System Secondary Filter - Replace
C4.4 (Mech) Industrial Engine Fuel System Primary Filter/Water Separator - Drain
Replacing the Combustion Head for the Aftertreatment Regeneration Device{1088, 1720, 1722} Replacing the Combustion Head for the Aftertreatment Regeneration Device{1088, 1720, 1722}
C9 On-highway Engine Valve Mechanism Cover
3508C, 3512C and 3516C Marine Engines Exhaust Manifold - Remove and Install
2009/10/05 New Improved Air Lines for Air Compressors Are Now Used on C15 and C18 Industrial Engines {5502}
2007/02/01 New Improved Air Lines for Air Compressors Are Now Used {5502}
3508C, 3512C and 3516C Marine Engines Water Pump - Remove
C9 On-highway Engine Valve Mechanism Cover - Remove and Install
C7 and C9 On-Highway Engines Engine Monitoring Lamp Parameters
C9 On-highway Engine Rocker Arm and Shaft - Remove