Make Sure that the Oil Shields are Installed Correctly {1100}
- Engine:
- 3508 (S/N: 95Y1-UP; 97Y1-UP; 68Z1-UP)
- 3508B (S/N: 7SM1-UP; 5PS1-UP)
- 3512 (S/N: 2WK1-UP; 49Y1-UP; 51Y1-UP; 65Z1-UP; 67Z1-UP)
- 3512B (S/N: 8DF1-UP; PWG1-UP; T2L1-UP; 3ZW1-UP)
- 3516 (S/N: 5MJ1-UP; 27Z1-UP; 71Z1-UP)
- 3516B (S/N: BCK1-UP; CAN1-UP; 6HZ1-UP)
- 3516C (S/N: T2X1-UP)
The 234-8776 Oil Shield is used in applications that operate under the following types of conditions:
- Cold ambient temperatures
- Long periods of operation at low idle
The 234-8776 Oil Shield helps prevent oil that drips from the 197-7063 Rotocoil Assembly from reaching the valve stem. This helps prevent the the valve from becoming seized. The 234-8776 Oil Shield must be installed correctly.
The 234-8776 Oil Shield has an external ridge on the outside diameter of the small end. The ridge allows for a snap fit into the bottom inside diameter of the 197-7063 Rotocoil Assembly. Install the oil shield onto the rotocoil prior to installation of the rotocoil assembly onto the valve stem. Refer to Illustration 1.
Show/hide table
Illustration 1 | g01340353 |
(1) 197-7063 Rotocoil Assembly (2) 234-8776 Oil Shield |
Caterpillar Information System:
C6.6 Industrial Engine Maintenance Interval Schedule
3500B Industrial Engines Instrument Panel
2007/02/01 New Fuel Pressure Regulators are Now Available {1715}
2007/02/05 New Fuel Pressure Regulators are Now Available {1715}
2013/02/27 New Fuel Pressure Regulators are Now Available {1715}
2008/02/11 The Heavy Pistons are Cancelled {1214, 1225}
3500C Marine Auxiliary Engines Prelubrication - Test
3500C Marine Auxiliary Engines Injector Solenoid - Test
C4.4 (Mech) Industrial Engine Piston Cooling Jet
TH55FT-E70 and TH55FT-E90 Petroleum Transmissions Torque Converter
TH55FT-E70 and TH55FT-E90 Petroleum Transmissions Power Train Hydraulic System
C0.5, C0.7, C1.1, C1.5, C1.6 and C2.2 Industrial Engines Starting the Engine
C-15, C-16, and C-18 Truck Engines Electric Starting Motor
C-15, C-16, and C-18 Truck Engines Electric Starting Motor
3408C and 3412C Marine Engines Electric Starting Motor
3500C Marine Auxiliary Engines Sensor Signal (PWM) - Test
3500C Marine Auxiliary Engines Sensor Supply - Test
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Monitoring System Output Components
3500C Marine Auxiliary Engines Speed Control (Switch) - Test
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Water Temperature Regulators - Remove
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Monitoring System Input Components
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Water Temperature Regulators - Install
CX48-P2300 Petroleum Transmission Transmission Torque Converter Housing
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Water Pump - Remove