A New Backup Ring for the Fuel Injector Group is Now Available {1251, 1254, 1290}
- Engine:
- C7 (S/N: JRA1-UP; JTF1-UP)
- Generator Set:
- C9 MARINE GS (S/N: C9A1-UP)
- Industrial Engine:
- C9 INDUSTRIAL (S/N: JSC1-UP; MBD1-UP; JLW1-UP)
- Marine Engine:
- C7 MARINE (S/N: C7D1-UP; C7Z1-UP)
- C9 (S/N: C9E1-UP; X3R1-UP)
- C9 MARINE GEN (S/N: SJB1-UP)
- C9 MARINE (S/N: C9B1-UP; X9X1-UP; CSN1-UP; Z9X1-UP)
A new 293-0730 Backup Ring has been released for use in all C7 and C9 Marine Engines and Industrial Engines. The new backup ring improves the sealing of the fuel injectors. The new backup ring must be used in conjunction with the O-rings that are listed below. Refer to Illustration 1 for the locations of the O-rings and the backup rings.
If oil is leaking past the injectors and/or if a 164-11 diagnostic code is logged, replace all of the O-rings and backup rings.
If one O-ring needs to be replaced, Caterpillar recommends replacing all O-rings and all of the backup rings on all of the injectors.
Show/hide table
Illustration 1 | g01290015 |
(1) 238-8091 Fuel Injector Gp (2) 293-0730 Backup Ring (3) 148-2903 O-Ring Seal (4) 149-5240 Backup Ring (5) 109-3207 O-Ring Seal |
Caterpillar Information System:
2006/07/24 A New Backup Ring for the Fuel Injector Group is Now Available {1251, 1254, 1290}
C27 and C32 Generator Set Engines Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Remove
2006/08/01 New Oil Pan is Now Available {1302}
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Transmission Control (Shift Solenoid) - Calibrate
Caterpillar Logic Control Governor One (LCG1) and Caterpillar Logic Control Governor Two (LCG2){1264, 1908} Caterpillar Logic Control Governor One (LCG1) and Caterpillar Logic Control Governor Two (LCG2){1264, 1908}
3612 and 3616 Engines Fuel Priming Pump - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Torque Converter - Assemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Torque Converter - Disassemble
3612 and 3616 Engines Fuel Priming Pump - Remove
C32 Power Module Air Inlet Filter - Check
C15 On-Highway Engine Valve Mechanism Cover Base - Remove and Install
C27 and C32 Generator Set Engines Fan Guard - Remove and Install
C27 and C32 Generator Set Engines Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Install
C175-16 and C175-20 Generator Set Engines Temperature Sensor
C280-12 and C280–16 Marine Engines Fuel Pressure Control Valve - Remove
C280-12 and C280–16 Marine Engines Fuel Pressure Control Valve - Install
C27 and C32 Generator Set Engines Engine - Remove
C175-16 Locomotive Engine Pressure Sensor
C27 and C32 Generator Set Engines Engine - Install
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Attachments
C15 Petroleum Generator Set Engines Water Lines
2007/01/15 A New Speed-Timing Sensor is Available {1912}
Incorrect Programming of the "Pulses Per Mile" Parameter in CAT ET Configuration Screen{0785, 1901} Incorrect Programming of the "Pulses Per Mile" Parameter in CAT ET Configuration Screen{0785, 1901}
325D and 329D Excavators Hydraulic System General Information