Product Description
The 3516C Series of engines are electronically controlled diesel engines. The engines have electronic fuel injectors. The engines can be equipped with either separate circuit aftercooling or jacket water aftercooling.
3516C Specifications
Show/hide table
3516C Specifications     | |||
Engine     | 3516C     | ||
Cylinders and arrangement     | 60 degree Vee 16     | ||
Bore     | 170 mm (6.7 inch)     |
||
Stroke     | 190 mm (7.5 inch)     |
||
Type     | 4 stroke cycle     | ||
Compression ratio     | 14:1     | ||
Aspiration     | Turbocharged     | ||
Method of cooling the turbocharged air     | Separate circuit aftercooler     | ||
Jacket water aftercooler (option) | |||
Displacement per cylinder     | 4.3 L (263 cu in)     |
||
Total displacement     | 69.1 L (4210 cu in)     |
||
Rotation (flywheel end)     | Counterclockwise     | ||
Fuel     | See this Operation and Maintenance Manual, "Fuel Recommendations" (Maintenance Section).     | ||
Method of fuel injection     | Electronic fuel injectors     | ||
Method of starting     | Air starting motor     | ||
Electric starting motor | |||
Exhaust back pressure (design)     | 2.5 kPa (10 inches of H2O)     |
||
Maximum allowable back pressure     | 5.0 kPa (20 inches of H2O)     |
||
Maximum inlet air Restriction     | 6.2 kPa (25 inches of H2O)     |
3516C Engine Design
Show/hide table
Illustration 1 | g00749770 |
3516C Engine design (A) Inlet valve (B) Exhaust valve (C) Flywheel |
Caterpillar Information System:
3516C Locomotive Engine Overhaul Considerations
374F Excavator Machine System Pressure Switch (Refrigerant Pressure Cutoff)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Interface Connectors
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Customer Contacts Terminal Block
2006/06/05 Correction to Testing and Adjusting , "Relief Valve (Main) - Test and Adjust (Heavy Lift)" {5069, 5069, 5069}
C4.4 Industrial Engine Engine Valve Lash - Inspect/Adjust
C11 and C13 Engines Muffler
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Customer Contacts Interface PWA
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Modem and Power Supply
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Starting Motor - Inspect
3044C Industrial Engine Alternator and Fan Belts - Inspect/Adjust/Replace
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Vacuum Pump Startup - Required Procedures After Extended Storage
3516C Locomotive Engine Refill Capacities and Recommendations
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Fan (Controls Cabinet)
3516C Locomotive Engine Engine Oil and Filter - Change
C7 and C9 On-highway Engines Monitoring System
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector Rocker Arm
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys AC Filter Capacitor
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Filter Fuse, Fuse Status Indicator and Discharge Resistor
C11 and C13 Engines Liquid Level Sensor (Water Separator)
C4.4 Industrial Engine Fuel Priming Pump - Remove and Install - Electric Fuel Priming Pump
3516C Locomotive Engine Instrument Panel
3116 and 3126 Truck Engines Inlet Manifold - Remove
3116 and 3126 Truck Engines Inlet Manifold - Install