Cylinder Head - Remove
拆卸步骤
开始:
- 拆下摇臂和摇臂轴。 请参阅拆解和组装, "摇臂和摇臂轴 - 拆卸"。
- 拆下电子单体喷油器。 请参阅拆解和组装, "电子单体喷油器 - 拆卸"。
- 拆下气门机构罩盖底座。 请参阅拆解和组装, "气门机构罩盖底座 - 拆卸和安装"。
- 拆下风扇驱动装置。 请参阅拆解和组装, "风扇驱动装置 - 拆卸"。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 将冷却液从冷却系统中排入合适的容器,以便保存或弃置。 请参阅操作和保养手册, "冷却系统冷却液(ELC)- 更换"。
- 拆下螺栓 (7) ,然后拆卸支撑组件 (8) 。 松开到水温调节器 (3) 的软管组件 (6) 。
Show/hide table
图 1 | g01259334 |
- 断开线束组件 (4) 。
- 断开管组件 (5) 。
- 拆下螺栓 (1) 和 (2) 以及垫圈。
- 将适当的起吊设备连接到缸盖 (9) 。 缸盖 (9) 的重量约为 108 kg (238 lb)。 拆下缸盖 (9) 和密封垫。
Show/hide table
图 2 | g01259335 |
Caterpillar Information System:
C4.4 Industrial Engine Fuel System Primary Filter (Water Separator) Element - Replace
Update of the Initial Flash Procedure for the Primary ECM{0785, 7620} Update of the Initial Flash Procedure for the Primary ECM{0785, 7620}
Bench Test Procedure for a CX31 On-Highway Transmission and CX31-P600 Petroleum Transmission {3030, 3073} Bench Test Procedure for a CX31 On-Highway Transmission and CX31-P600 Petroleum Transmission {3030, 3073}
3500B and 3500C Locomotive Engines Sensor Supply
3500B and 3500C Locomotive Engines Pulse Width Modulated Sensor
C4.4 Industrial Engine Introduction
C7 PETROLEUM Petroleum Engine Rocker Arm - Assemble
C7 PETROLEUM Petroleum Engine Rocker Arm and Shaft - Install
C7 On-Highway Engine Fan Drive Mounting Group - Remove and Install
3456 Generator Sets Maintenance Interval Schedule - Standby Generator Sets
3456 Generator Sets Maintenance Interval Schedule - Prime Power Generator Sets
C7 PETROLEUM Petroleum Engine Rocker Arm - Disassemble
3500B and 3500C Locomotive Engines Starting Motor System
C15 and C18 Petroleum Generator Sets Generator Lead - Check
C7 On-Highway Engine Clean Gas Induction Valve - Install
C4.4 Industrial Engine Fuel System Secondary Filter - Replace
C7 On-Highway Engine Combustion Head - Remove and Install
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Startup (MMS) - Multiple Module System
C4.4 Industrial Engine Basic Engine
2006/04/01 Replacement Criteria for Camshafts {1210}
2006/04/03 Replacement Criteria for Camshafts {1210}
3500B and 3500C Locomotive Engines Start/Run/Stop Switch
C7 PETROLEUM Petroleum Engine Cylinder Head - Install
2006/05/01 New Location for the Magneto's Vent {1552}