New Software is Now Available for VIMS {7620}
- Wheel Loader:
- 992G (S/N: AZX1-UP)
- Wheel Dozer:
- 854G (S/N: A4W1-UP)
Erroneous service codes may be generated for the torque converter oil temperature sensor:
- CID 436 FMI 03 "Torque Converter Oil Pressure Sensor Voltage Above Normal"
- CID 436 FMI 04 "Torque Converter Oil Pressure Sensor Voltage Below Normal"
Before an attempt is made to replace the 216-8684 Pressure Sensor, first update the VIMS software to version 10.52.
Caterpillar Information System:
C9.3 Engine for D7E Track-Type Tractor Fuel System
D7E Track-Type Tractor Power Train Final Drive - Disassemble
D3K, D4K and D5K Track-Type Tractors Seat Belt
New Routing for Hydraulic Lines{3016, 3024} New Routing for Hydraulic Lines{3016, 3024}
Tier I Level Emissions Engine Repower for the D10N Track-Type Tractor {1000, 7000} Tier I Level Emissions Engine Repower for the D10N Track-Type Tractor {1000, 7000}
2008/09/15 An Improved Engine Enclosure Support Strut is Now Available {7251}
2009/02/16 Correction to Disassembly and Assembly , "Front Suspension (Cylinder) - Disassemble" {7201}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300} Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
2008/08/18 A New Duct Assembly For The Alternator Is Being Installed {1405}
2008/08/25 An Improved Hydraulic Electronic Unit Injector (HEUI) Pump is Available {1714}
613G Wheel Tractor-Scraper Hydraulic System Parking Brake Actuator - Adjust
2008/12/01 Improvements To Brake Hose Assemblies Across Hitch {4257, 4269}
993K Wheel Loader Machine Systems Piston Pump (Implement) - Remove - Front and Rear, RH
C4.4 Engines For Caterpillar Built Machines Engine Cranks but Will Not Start
D6K Track-Type Tractor Operator Controls
D3K, D4K and D5K Track-Type Tractors Caterpillar Approved Work Tools
Procedure to Rework Housings for the Installation of New Planetary Bolts{3030, 3064, 3105} Procedure to Rework Housings for the Installation of New Planetary Bolts{3030, 3064, 3105}
C9.3 Engine for D7E Track-Type Tractor General Information
C9.3 Engine for D7E Track-Type Tractor Electronic Control System Components
Installation Procedure For The New Duct Assembly{1405} Installation Procedure For The New Duct Assembly{1405}
2008/08/25 Improved Lower Pin Joint for Bucket {6107, 6108, 6109, 6118}
613G Wheel Tractor-Scraper Power Train Torque Converter Inlet Oil Pressure - Test
2008/10/27 A New U-Cup Seal Updates the Servo Steering Cylinder {4315}
993K Wheel Loader Machine Systems Ride Control Valve - Install