Piston Pump (Brake) - Assemble
组装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 1P-1858     | 挡圈钳     | 1     |
B     | 1P-1857     | 挡圈钳     | 1     |
C     | 1P-0510     | 冲头总成     | 1     |
D     | 1P-1859     | 挡圈钳     | 1     |
E     |     | 管 (1)     | 1     |
Show/hide table
( 1 ) | 41.35 mm (1.63 in) 外径 |
- 检查所有密封件的状况。 如果任何密封磨损或损坏,则利用新件进行更换。
- 将滑阀 (45) 、护圈 (44) 、弹簧 (43) 、O 形密封圈 (42) 和 壳体 (41) 安装到壳体 (46) 中。
Show/hide table
图 1 | g01431257 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 安装 O 形密封圈 (40) 。
Show/hide table
图 2 | g01431256 |
- 用清洁的液压油润滑滚针轴承 (39) 。 使用工具 (C) 将滚针轴承 (39) 安装到泵壳体 (5) 内侧。 确保轴承 (39) 带有编号的一端朝向外侧。
滚针轴承应在沉孔外表面 (X) 以下 1.96 ± 0.38 mm (.077 ± .015 in)。
Show/hide table
图 3 | g00335916 |
- 将套环 (37) 置于弹簧 (38) 上。 将弹簧和套环安装在泵壳体中。
Show/hide table
图 4 | g00335911 |
- 将销和按钮安装在旋转斜盘 (36) 上。
Show/hide table
图 5 | g00335917 |
- 将旋转斜盘 (36) 在液压泵壳体 (5) 上放置到位,使按钮位于套环 (37) 的座上。
Show/hide table
图 6 | g00335912 |
- 用清洁的液压油润滑滚针轴承 (29) 和 (32) 。
Show/hide table
图 7 | g00335910 |
- 安装轴承圈 (30) 和 (31) 、滚针轴承 (29) 和 (32) 、密封件 (28) 和 (33) ,以及盖 (27) 和 (34) 。
- 使用工具 (B) 将挡圈 (26) 和 (35) 安装到泵壳体 (5) 中。
- 使用工具 (D) 将挡圈 (19) 安装到轴 (18) 的槽上。
Show/hide table
图 8 | g00335909 |
- 将轴承圈 (20) 、止推轴承 (21) 和轴承圈 (22) 安装到轴 (18) 上。
- 使用工具 (D) 将挡圈 (23) 安装到轴 (18) 的槽上。
- 将垫圈 (24) 安装在轴 (18) 上。
- 使用工具 (E) 将密封件 (25) 安装到泵壳体 (5) 中。 确保密封唇朝向泵壳体内侧。
Show/hide table
图 9 | g00335940 |
- 将轴 (18) 安装到泵壳体上。
Show/hide table
图 10 | g00335907 |
- 使用工具 (A) 将挡圈 (17) 安装在泵壳体 (5) 中。
- 将销 (13) 安装在油缸筒组件 (8) 中。
Show/hide table
图 11 | g00335904 |
- 将垫片 (9) 、弹簧 (10) 和垫片 (11) 安装到油缸筒组件 (8) 上。
Show/hide table
图 12 | g00335903 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 使用工具 (B) 和适当的压力机将挡圈 (12) 安装在油缸筒组件 (8) 上。
- 将活塞 (14) 和盘 (15) 安装在柱塞缸组件 (8) 上。
Show/hide table
图 13 | g00335944 |
- 将活塞 (16) 置于盘 (15) 和油缸筒组件 (8) 上的初始位置。
Show/hide table
图 14 | g00335948 |
- 将油缸筒组件 (8) 在泵壳体 (5) 上放置到位,如图所示。
Show/hide table
图 15 | g00335947 |
- 使用工具 (A) 将滚针轴承 (6) 安装在盘组件 (3) 上。 确保轴承 (6) 带有编号的一端朝向泵壳体。
滚针轴承应在盘组件表面以下 0.80 ± 0.40 mm (0.031 ± .0.016 in)。
Show/hide table
图 16 | g00335901 |
- 将活塞 (7) 在盘组件 (3) 上放置到位。
- 将垫片 (4) 和盘组件 (3) 在泵壳体 (5) 上放置到位。
Show/hide table
图 17 | g00335900 |
- 安装将装置固定在一起的螺栓。 螺栓的扭矩为 38 ± 4 N·m (28 ± 3 lb ft)。
- 检查密封件 (40) 和垫片 (41) 有无磨损或损坏。 如果有任一部件磨损或损坏,将新的零件安装在伺服阀 (2) 上。
Show/hide table
图 18 | g00335955 |
- 将伺服阀 (2) 在盘组件 (3) 上放置到位。
Show/hide table
图 19 | g00335899 |
- 安装将伺服阀 (2) 固定在位的螺钉 (1) 。 螺钉的扭矩为 23 ± 2 N·m (17 ± 1 lb ft)。
- 向制动泵加注机油。 转动轴以确保轴能自由转动。
End By: 安装制动泵。 请参阅 拆解和组装, "活塞泵(制动)- 安装"。
Caterpillar Information System:
854K Wheel Dozer Machine Systems Piston Pump (Brake) - Disassemble
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0268 - FMI 02
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0168 - FMI 00
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0168 - FMI 01
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System Event Code List
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System Connector Locations
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System General Information
Procedure to Repair the Wheel Tractor-Scraper Plate Assemblies and Cylinder Support Assemblies{6207, 6245} Procedure to Repair the Wheel Tractor-Scraper Plate Assemblies and Cylinder Support Assemblies{6207, 6245}
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Joystick Control and Pilot Valve (Electrohydraulic Control) - Install
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Joystick Control and Pilot Valve (Electrohydraulic Control) - Remove
2007/12/17 Improvements to the Wheel Scraper Plate Assemblies Have Been Made {6207, 6245}
854K Wheel Dozer Hydraulic System Push Arm - Left Hand
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0585 - FMI 08
Procedure To Clean Track-Type Tractor And Pipelayer Power Train Oil Systems Equipped With Electronic Controls {3030, 3101, 4101, 4130} Procedure To Clean Track-Type Tractor And Pipelayer Power Train Oil Systems Equipped With Electronic Controls {3030, 3101, 4101, 4130}
992K Wheel Loader Machine Systems Piston Pump (Implement, RH) - Install
2008/02/11 Improvements for the Torque Converter {3101}
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector - Test
525C, 535C and 545C Wheel Skidders Hydraulic and Steering System Articulated Hitch
854K Wheel Dozer Hydraulic System Bulldozer Trunnion
992K Wheel Loader Machine Systems Piston Pump (Implement, Center) - Remove
992K Wheel Loader Machine Systems Piston Pump (Implement, Center) - Install
854K Wheel Dozer Machine Systems Piston Pump (Steering) - Disassemble
854K Wheel Dozer Machine Systems Piston Pump (Steering) - Assemble
Procedure to Repair the Mainframe on Certain Track-Type Tractors{7050} Procedure to Repair the Mainframe on Certain Track-Type Tractors{7050}