Radiator Group - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 189-0411     | 钩环组件     | 2     |
注: 冷却系统的部件和重量可能根据您的配置总成而有所变化。
注: 在所有管路、软管、导线及管上做出识别标记以便安装。 在所有管路、软管和管子上盖上盖子和螺塞,以便防止液体损失或系统污染。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
在工作温度下,发动机冷却液是热的,并且带有压力。 蒸汽还会引起人身伤害。 只有在发动机已关闭且加注口盖冷却到可徒手触摸后,才能检查冷却液液位。 缓慢卸下加注口盖,释放其中压力。 冷却系统添加剂含碱。 应避免皮肤和眼睛与其接触,以防造成人身伤害。 |
- 从冷却系统将冷却液排入合适的容器以便保存或废弃这些冷却液。 请参阅操作和保养手册, "冷却系统的冷却液(ELC)-更换"或操作和保养手册, "冷却系统冷却液(DEAC)-更换"。
- 断开线束组件 (2) 。
Show/hide table
图 1 | g01225862 |
- 断开管组件 (1) 。
- 断开管组件 (3) 。
Show/hide table
图 2 | g01225865 |
- 断开弯头 (4) 。
Show/hide table
图 3 | g01225867 |
- 拆下防护罩组件 (5) 。
Show/hide table
图 4 | g01225892 |
- 拆卸皮带 (6) 。
Show/hide table
图 5 | g01225893 |
- 将工具 (A) 和适当的起吊设备连接到散热器总成 (7) 上。 散热器总成 (7) 的重量约为 2050 kg (4500 lb)。
Show/hide table
图 6 | g01225897 |
- 将螺栓 (8) 和盖 (9) 从两侧拆下。
Show/hide table
图 7 | g01225901 |
Show/hide table
图 8 | g01225902 |
- 从发动机 (10) 拆下散热器总成 (7) 。
Show/hide table
图 9 | g01225904 |
Caterpillar Information System:
C15 Petroleum Generator Set Engines Valve Mechanism Cover
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Circuit Breakers - Reset
C3.3 Industrial Engine Engine Valve Lash - Inspect/Adjust
C3.3 Industrial Engine Engine Oil and Filter - Change
C3.3 Industrial Engine Engine Mounts - Inspect
C3.3 Industrial Engine Alternator and Fan Belts - Inspect/Adjust/Replace
2005/12/12 Shop Chemicals are now Listed in Cat Shop Supplies and Hand Tools {0599, 0644, 0645}
3126B and 3126E Truck Engines Cylinder Head
CX31 On-Highway Transmission Retarder Hydraulic Control Valve
TH48-E80 Petroleum Transmission Maximum Pressure for Lockup Clutch and Solenoid Valve (Torque Converter) - Test
C15 Petroleum Generator Set Engines Cylinder Head Valves
C7 Marine Engine Flywheel
C11 and C13 Engines Turbocharger
3500B Engines Radiator Group - Install
3500 Engines Fan Drive - Remove
2006/01/02 New Sequence for Adjusting the Fuel Injectors {1290, 1290}
3126B and 3126E Truck Engines Turbocharger
AP-800D and BG-230D Asphalt Pavers Fuel System - Prime
2014/01/31 Procedure for Installing the Camshaft Drive Gear {1212}
2005/12/12 Procedure for Installing the Camshaft Drive Gear {1212}
3512 Industrial Engine Governor Drive
C13T-TH35 and C15T-TH35 Petroleum Packages Transmission Control
3126B and 3126E Truck Engines Turbocharger
2005/12/05 Aftercoolers that are Made of a Stainless Steel Alloy are Now Available {1063}