Engine - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件名称     | 数量     |
A     | 1U-9200     | 杠杆式拔拉起重机     | 1     |
138-7574 | 连杆支架     | 1     | |
B     | 6U-3145     | 钢条     | 1     |
开始:
- 拆下发动机罩。 请参阅拆解和组装, "发动机罩 - 拆卸 "。
- 拆下消声器。 请参阅拆解和组装, "消声器 - 拆卸和安装 "。
- 拆下曲轴箱防护罩。 请参阅拆解和组装, " 曲轴箱防护罩 - 拆卸和安装"。
- 拆下散热器模块。 请参阅拆解和组装, "散热器模块 - 拆卸 "。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
注: 清洁度是一项重要的因素。 拆解步骤开始之前,应彻底清洁部件外部。 这将有助于防止脏污进入内部机构。
注: 为便于安装,在所有管路、所有软管、所有导线及所有管上做出识别标记。 插接好所有线路、软管和管路。 这将有助于防止液体泄漏和有助于防止污染物进入系统。
- 将蓄电池断路开关转到断开 (OFF) 位置。
- 打开气门 (1) 。
Show/hide table
图 1 | g01277335 |
- 关闭阀 (2) 。
Show/hide table
图 2 | g01277337 |
- 断开软管 (3) 。
Show/hide table
图 3 | g01277338 |
- 断开软管组件 (4) 、 (5) 和 (6) 。
Show/hide table
图 4 | g01277340 |
- 断开电缆组件 (8) 。 断开软管组件 (7) 。
Show/hide table
图 5 | g01277350 |
- 断开线束组件 (9) 。
Show/hide table
图 6 | g01277352 |
- 断开线束组件 (10) 。
Show/hide table
图 7 | g01277353 |
- 断开软管组件 (11) 。
Show/hide table
图 8 | g01277357 |
- 断开线束组件 (13) 。 拆下螺栓 (14) 。 将支架组件 (12) 放在一边。
Show/hide table
图 9 | g01277358 |
- 断开软管 (15) 。 断开软管组件 (16) 。
Show/hide table
图 10 | g01277360 |
- 将工具 (A) 和适当的起吊设备连接到分动器壳体 (17) 上。 分动器 (17) 的重量约为 376 kg (830 lb)。
Show/hide table
图 11 | g01277361 |
- 拆下螺栓 (18) 。
Show/hide table
图 12 | g01277363 |
- 将工具 (B) 和适当的起吊设备连接到发动机 (19) 上。 发动机 (19) 的重量约为 2041 kg (4500 lb)。
Show/hide table
图 13 | g01277365 |
- 拆下螺栓 (20) 和 (21) 。 拆下盖 (23) 。 拆下支架 (22) 。
Show/hide table
图 14 | g01277366 |
- 拆下螺栓 (24) 。
Show/hide table
图 15 | g01277367 |
- 拆下发动机 (19) 。
Show/hide table
图 16 | g01277368 |
Caterpillar Information System:
D7G Series 2 and D7G Series II Track-Type Tractors Towing the Machine
D6G Series 2 Track-Type Tractor Lifting and Tying Down the Machine
IT38H Integrated Toolcarrier and 938H Wheel Loader Window Washer Reservoir - Fill
IT38H Integrated Toolcarrier and 938H Wheel Loader Window Wiper - Inspect/Replace
631G and 637G Wheel Tractor-Scrapers Machine Systems Air Lines
IT38H Integrated Toolcarrier and 938H Wheel Loader Steering Column Spline (HMU Steering) - Lubricate
IT38H Integrated Toolcarrier and 938H Wheel Loader Steering Frame Lock
631G and 637G Wheel Tractor-Scrapers Auger Hydraulic System General Information
525C, 535C and 545C Wheel Skidders Power Train Oscillating Axle (Front) - Install
525C, 535C and 545C Wheel Skidders Power Train Oscillating Axle (Front) - Remove
Installation of a 3406 Engine Emissions Upgrade Group Retrofit for a 980C Wheel Loader{1000, 1000} Installation of a 3406 Engine Emissions Upgrade Group Retrofit for a 980C Wheel Loader{1000, 1000}
854K Wheel Dozer Axle Oscillation Bearings - Lubricate
631G and 637G Wheel Tractor-Scrapers Auger Hydraulic System Auger Hydraulic System
IT38H Integrated Toolcarrier and 938H Wheel Loader Articulation Bearings - Lubricate
IT38H Integrated Toolcarrier and 938H Wheel Loader Equipment Lowering with Engine Stopped
IT38H Integrated Toolcarrier and 938H Wheel Loader Work Tool Positioner
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Starting with Auxiliary Start Receptacle - If Equipped
631G and 637G Wheel Tractor-Scrapers Machine Systems Air Lines
966H and 972H Wheel Loaders Roading Fender Hinges - Lubricate - If Equipped
Installation Instructions for the 290-3535 Handrail and Step Gp (Kit) (Cab, Front Access), the 291-1770 Handrail and Step Gp (Kit) (Cab, Front Access) and the 290-3543 Handrail and Step Gp (Kit) (Cab, Front Access){7254, 7256} Installation Instructions for the 290-3535 Handrail and Step Gp (Kit) (Cab, Front Access), the 291-1770 Handrail and Step Gp (Kit) (Cab, Front Access) and the 290-3543 Handrail and Step Gp (Kit) (Cab, Front Access){7254, 7256}
631G and 637G Wheel Tractor-Scrapers Machine Systems Ether Starting Aid
631G and 637G Wheel Tractor-Scrapers Machine Systems Ether Starting Aid
657G Wheel Tractor-Scraper Engine Supplement Engine - Install
657G Wheel Tractor-Scraper Engine Supplement Water Temperature Regulator - Remove and Install