Pivot Bar-Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 136-1978 | Forcing Bolt | 2 |
Start By:
- Remove the track roller frame. Refer to Disassembly and Assembly, "Track Roller Frame - Remove".
- Remove seal (1).
Show/hide table
Illustration 2 g01228706 - Remove plugs (2).
Show/hide table
Illustration 3 g00987947 - Install Tooling (A).
- Attach a suitable lifting device to pivot bar (4).
- Remove bolts (3).
- Use Tooling (A) in order to remove pivot bar (4). The weight of pivot bar (4) is approximately
36 kg (80 lb) .
Show/hide table
Illustration 1 | g00987944 |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
B | 4C-5597 | Anti-Seize Compound | 1 |
- Apply Tooling (B) to the back side off pivot bar (4).
- Position pivot bar (4). The weight of pivot bar (4) is approximately
36 kg (80 lb) . - Install bolts (3).
Show/hide table
Illustration 5 g01228706 - Install plugs (2).
Show/hide table
Illustration 6 g00987944 - Install seal (1).
Show/hide table
Illustration 4 | g00987955 |
End By:
- Install the track roller frame. Refer to Disassembly and Assembly, "Track Roller Frame - Install".
Caterpillar Information System:
D6N Track-Type Tractor Power Train Front Track Roller Frame - Install
D6N Track-Type Tractor Power Train Front Track Roller Frame - Remove
D6N Track-Type Tractor Power Train Equalizer Bar - Remove
D6N Track-Type Tractor Power Train Equalizer Bar - Install
C15 Petroleum Generator Set Engines Gear Group (Front)
C7 Engines for Caterpillar Built Machines Unit Injector - Install
C7 Engines for Caterpillar Built Machines Unit Injector - Remove
2003/04/21 Correction to Testing and Adjusting , "Pressure Tap Locations" {3030}
2003/06/23 Correction to Testing And Adjusting , "Transmission Testing and Location of The Pressure Taps" {3030, 3073}
3046 Engine for Caterpillar Built Machines Flywheel Housing - Inspect
C15 Petroleum Generator Set Engines Electronic Unit Injector Rocker Arm
C4.4 (Mech) Industrial Engine Battery - Test
D6N Track-Type Tractor Power Train Track Adjuster - Remove and Install
D6N Track-Type Tractor Power Train Track Roller Frame - Remove
D6N Track-Type Tractor Power Train Track Roller Frame - Install
Supplement for the 973C Track-Type Loader with the Steel Mill Arrangement{7000} Supplement for the 973C Track-Type Loader with the Steel Mill Arrangement{7000}
3044C Industrial Engine and Engines for Caterpillar Built Machines Glow Plugs
963C Track-Type Loader Hydraulic System Lift Cylinder
963C Track-Type Loader Hydraulic System Tilt Cylinder
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
2003/03/31 Correction to Disassembly and Assembly , "Transmission Planetary - Disassemble" {3030, 3160}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Transmission Control (Shift Lever)
C7 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove