Bail Cylinder
Show/hide table
 | |
| Illustration 1 | g00931845 |
Lightly lubricate the seals with the lubricant that is being sealed.
(1) Diameter of new piston ... 75.70 ± 0.03 mm (2.980 ± 0.001 inch)
(2) Bore in new cylinder ... 75.82 + 0.00 - 0.25 mm (2.985 + 0.000 - 0.010 inch)
(3) Bore in new head ... 44.78 ± 0.03 mm (1.763 ± 0.001 inch)
(4) Diameter of new rod ... 44.400 ± 0.038 mm (1.7480 ± 0.0015 inch)
(5) Torque for head with clean grease on threads ... 600 ± 130 N·m (443 ± 96 lb ft)
(6) Apply 7M-7456 sealant to the wiper seal groove prior to assembly.
Caterpillar Information System:
D10R Track-Type Tractor Safety Messages
D10R Main Frame and Fender Crossbeam Pinned Mount Conversion{7050} D10R Main Frame and Fender Crossbeam Pinned Mount Conversion{7050}
3126B Machine Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
631G and 637G Wheel Tractor-Scrapers Machine Systems Bail Cylinder and Mounting
2002/10/28 Correction to Operation and Maintenance Manual , "Equipment Lowering with Engine Stopped" {7000}
C15 Petroleum Generator Set Engines Electric Starting Motor
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Test/Enable Switch
631G and 637G Wheel Tractor-Scrapers Hydraulic System Apron
2002/10/28 Examine Failed Starting Motors to Understand the Reason for Failure {1453}
631G and 637G Wheel Tractor-Scrapers Hydraulic System Apron
2002/10/28 Correction to Operation and Maintenance Manual , "Equipment Lowering with Engine Stopped" {7000}
Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070} Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070}
3054E Industrial Engine Flywheel - Remove
D10R Track-Type Tractor Cooling System Extended Life Coolant Extender - Add
D11R Track-Type Tractor Model Specific Coolant Information
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 02 Filtered Oil Pressure Sensor misinstalled
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 03 Filtered Oil Pressure Sensor shorted high
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 04 Filtered Oil Pressure Sensor shorted low
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 13 Filtered Oil Pressure Sensor out of calibration
2004/04/19 A New Hydraulic Oil Cooler is Now Available {1374}
657G Wheel Tractor-Scraper Hydraulic System Operational Checks
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Electrical System
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System On/Off Pilot Solenoid Valve
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System On/Off Pilot Solenoid Valve