2005/05/23 Caterpillar

New ROPS Films, FOPS Films and TOPS Films Have Been Designed {7557}

Usage:

769C 01X

Caterpillar Products:
All

Show/hide table




Illustration 1	g01161206

Show/hide table




Illustration 2	g01161214

The certification plate for the ROPS, FOPS and TOPS have been redesigned. Two new polycarbonate films will be installed to all rollover protective structures (ROPS), falling object protective structures (FOPS), and tip over protection structures (TOPS).

The new film (1) and the new film (2) replace the former certification plate (3). The former plate was made from metal and the former plate included both warning and certification information.

The new film (1) replaces the warning information that was on the former certification plate (3). The new film (2) contains the certification information that is required to meet all standards and regulations. The new films will provide improved abrasion resistance and improved resistance to ultraviolet light. The new films also eliminate the requirement for translation to other languages for foreign sales.

Caterpillar Information System:

C7 On-highway Engine Exhaust Manifold

3054C and C4.4 Industrial Engine and Marine Auxiliary Engine Electric Starting Motor

3054C and C4.4 Industrial Engine and Marine Auxiliary Engine Electric Starting Motor

C7 On-highway Engine Engine Control Module

C4.4 Marine Generator Set Engines Fuel Injection Pump - Remove

C3.3 and C4.4 Generator Sets Fuel Injection Nozzles - Install

C4.4 (Mech) Marine Generator Set MCS-3 Magnetic Pickup

C280 Marine Propulsion Engines Low Power/Poor or No Response to Throttle

C4.4 Marine Auxiliary Generator Set Engine Glow Plugs

C4.4 Marine Auxiliary Generator Set Engine Aftercooler

320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes

C3.3 and C4.4 Generator Sets Fuel Injection Nozzles - Remove

C4.4 Industrial Engine Starting the Engine

TH48-E80 Petroleum Transmission Breather (Transmission) - Clean

TH48-E80 Petroleum Transmission Torque Converter and Transmission Oil Level - Check

C7 On-highway Engine Engine Oil Filter Base

2005/09/26 New Fuel Transfer Pump {1256}

C9.3 Tier 4 Final Engines Front Housing and Covers

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225} Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

325D and 329D Excavators Storage and Literature Compartment - If Equipped

C280 Marine Auxiliary Engines Noise Coming from Cylinder

C280 Marine Propulsion Engines Poor Fuel Consumption

3500 Engines Coolant Temperature Is Too High

TH48-E80 Petroleum Transmission Torque Converter and Transmission Oil - Change