Speed Sensor (Torque Converter Output) - Remove and Install
Removal Procedure
Start By:
- Install the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chock (Front and Rear) - Remove and Install".
- Connect the frame lock link. Refer to Disassembly and Assembly, "Frame Lock Link - Separate and Connect".
- Turn the battery disconnect switch to the OFF position.
- Disconnect wire harness (1) from speed sensor (2) .
Show/hide table
Illustration 1 | g00604421 |
- Remove speed sensor (2) and the O-ring seal from torque converter (3) .
Installation Procedure
- Install speed sensor (2) and the O-ring seal to torque converter (3) .
Show/hide table
Illustration 2 | g00604421 |
- Refer to Testing and Adjusting, "Power Train Electronic Control System" for the appropriate procedure.
- Connect wire harness (1) to speed sensor (2) .
End By:
- Separate the frame lock link. Refer to Disassembly and Assembly, "Frame Lock Link - Separate and Connect".
- Remove the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chock (Front and Rear) - Remove and Install".
Caterpillar Information System:
Installation of New 123-4610 Conversion Kit for the Flywheel Clutch{1007, 1156} Installation of New 123-4610 Conversion Kit for the Flywheel Clutch{1007, 1156}
3500B Engines Engine Oil Filter Base - Install - Spin-on Filters
613C Series II Wheel Tractor-Scraper Transmission Oil Filter and Magnetic Screen - Replace/Clean
613C Series II Wheel Tractor-Scraper Transmission Oil - Change
3500B Engines Engine Oil Filter Base - Assemble - Spin-on Filters
3500B Engines Engine Oil Filter Base - Disassemble - Spin-on Filters
613C Series II Wheel Tractor-Scraper Transmission Breather - Clean
545 Wheel Skidder Machine Systems Steering Cylinder - Remove and Install
3500B Engines Engine Oil Filter Base - Remove - Spin-on Filters
3500B Engines Engine Oil Filter Housing - Install
613C Series II Wheel Tractor-Scraper Air System and Brakes Parking Brake - Test and Adjust
613C Series II Wheel Tractor-Scraper Suction Screen (Transmission Scavenge) - Clean
Activation of 101-4000 Batteries, 115-2421 Batteries, and 9X-9730 Batteries That Are Shipped Without Electrolyte {1401} Activation of 101-4000 Batteries, 115-2421 Batteries, and 9X-9730 Batteries That Are Shipped Without Electrolyte {1401}
613C Series II Wheel Tractor-Scraper Transmission Oil Level - Check
613C Series II Wheel Tractor-Scraper Air System and Brakes Parking and Secondary Brake Control Valve
994D Wheel Loader Power Train Speed Sensor (Transmission Output) - Remove and Install
613C Series II Wheel Tractor-Scraper Belts - Inspect/Adjust/Replace
994D Wheel Loader Engine Supplement Prelubrication Oil Pump - Remove and Install
545 Wheel Skidder Machine Systems Lift Cylinder (Decking Blade) - Remove and Install
545 Wheel Skidder Power Train Axle Housing - Assemble
613C Series II Wheel Tractor-Scraper Window Washer Reservoir - Fill
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Inlet Manifold - Install - 3013, 3014, and 3024 Engines
924Gz Wheel Loader Single Lever Control - If Equipped
613C Series II Wheel Tractor-Scraper Windows - Clean