Brake Actuator - Remove
Removal Procedure
- Park the machine on a hard, level surface. Lower the scraper bowl to the ground and engage the parking brake. Chock the wheels in order to prevent the machine from moving.
- Purge the air from the air tanks.
Show/hide table
Pressurized air can cause personal injury. The air supply lines are pressurized to 830 kPa (120 psi). Purge the air from the system before performing any maintenance to the air system. |
- Put identification marks on all lines, hoses, wires, and tubes for installation purposes. Plug all lines, hoses and tubes.
- Install a 1/2" - 13 NC lifting eye to the rear access panel. Attach a nylon lifting strap and a hoist to the rear access panel. Remove four bolts (1) that secure rear access panel (2) to the machine. Remove rear access panel (2) from the machine. The rear access panel weighs 88 kg (194 lb).
Show/hide table
Illustration 1 | g00500101 |
- Disconnect two hose assemblies (3) from brake actuator (4) .
Show/hide table
Illustration 2 | g00528545 |
- Loosen adjustment screw (5). Loosen worm shaft (6) until pin (7) can be removed. Remove cotter pin (8) that secures pin (7) to yoke assembly (9). Remove pin (7) that secures yoke assembly (9) to the slack adjuster. Move yoke assembly (9) away from the slack adjuster. Remove two nuts (10) and the washers that secure brake actuator (4) to the machine. Remove brake actuator (4) from the machine.
Show/hide table
Illustration 3 | g00528546 |
Caterpillar Information System:
515 Wheel Skidder and 525 Wheel Skidder Transmission and Grapple Electronic Control System Troubleshooting Switch (Tong Auto/Manual)
623F Wheel Tractor-Scraper Machine Systems Brake Actuator - Install
623F Wheel Tractor-Scraper Machine Systems Brake Actuator - Remove
994D Air System Wheel Loader Air Tank
515 Wheel Skidder and 525 Wheel Skidder Ether Starting Aid Cylinder - Replace
3046 Engine For Caterpillar Built Machines Flywheel Housing - Remove and Install
963B Track-Type Loader Fuses - Replace
973 Track-Type Loader Power Train System Schematics
994D Air System Wheel Loader Pressure Sensor (Air Tank)
623F Wheel Tractor-Scraper Machine Systems Tractor and Scraper - Connect
623F Wheel Tractor-Scraper Machine Systems Tractor and Scraper - Separate
623F Wheel Tractor-Scraper Hydraulic System Pilot Control Valve (Three Functions)
623F Wheel Tractor-Scraper Machine Systems Brake Actuator - Install
994D Air System Wheel Loader Solenoid Valve (Air Start)
3516B Engine for Caterpillar Built Machines Customer Parameters Worksheet
994D Air System Wheel Loader Solenoid Valve (Automatic Lubrication)
980G Wheel Loader Machine Systems Pilot Valve (Oil Manifold) - Assemble
994D Air System Wheel Loader Solenoid Valve (Air Horn)
994D Air System Wheel Loader Relief Valve (Air Tank)
623F Wheel Tractor-Scraper Power Train Torque Converter - Assemble
623F Wheel Tractor-Scraper Hydraulic System Floor Cylinder
515 Wheel Skidder and 525 Wheel Skidder Hydraulic System Oil Level - Check
980G Wheel Loader Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install
994D Air System Wheel Loader Control Valve (Air Tank Drain)