Ejector Guide Roller - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-0510     | Driver Group     | 1     |
- Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) and a hydraulic press to install bushing (7) to roller (6) . Install the bushing until the bushing is seated in the roller.
Show/hide table
Illustration 1 | g00499384 |
- Install O-ring seal (5) to roller (6) . Connect the roller to the shaft.
Show/hide table
Illustration 2 | g00492443 |
- Use a pry bar to open bracket (2) to install guide roller (4) .
Show/hide table
Illustration 3 | g00492442 |
- Install grease fitting (3) to guide roller (4) . Install bolt (1) to bracket (2) . Adjust the guide roller. Refer to Hydraulic System, SENR8658 for information on adjusting the guide roller.
Show/hide table
Illustration 4 | g00492440 |
Caterpillar Information System:
615C Series II Wheel Tractor-Scraper Machine Systems Ejector Guide Roller - Remove
615C Series II Wheel Tractor-Scraper Machine Systems Floor - Remove and Install
615C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Install
615C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Remove
615C Series II Wheel Tractor-Scraper Machine Systems Ejector Cylinder - Remove and Install
3406C Engines for Caterpillar Built Machines Camshaft
615C Series II Wheel Tractor-Scraper Machine Systems Floor Dump Arm - Remove and Install
615C Series II Wheel Tractor-Scraper Machine Systems Ejector - Install
615C Series II Wheel Tractor-Scraper Machine Systems Ejector - Remove
615C Series II Wheel Tractor-Scraper Machine Systems Elevator Drive - Install
615C Series II Wheel Tractor-Scraper Machine Systems Elevator Drive - Remove
611 Wheel Tractor-Scraper 3306B Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
615C Series II Wheel Tractor-Scraper Machine Systems Hitch - Remove
615C Series II Wheel Tractor-Scraper Machine Systems Hitch - Install
D7R Track-Type TractorPower Train Transmission Oil Filter
515 Wheel Skidder and 525 Wheel Skidder Light Switches
623F Wheel Tractor-Scraper Power Train Retarder
3406C Engines for Caterpillar Built Machines Cylinder Head Valves
631E Series II Wheel Tractor-Scrapers Steering Column Tilt Control
623F Wheel Tractor-Scraper 3406C Engine Supplement Oil Pan - Remove and Install
D6F and D6G Track-Type Tractors Power Train General Information
D6R Track-Type Tractor Power Train Brake Control Valve
623F Wheel Tractor-Scraper Power Train Transmission Electronic Control System
515 Wheel Skidder and 525 Wheel Skidder Window Wiper and Washer Control