Selector Valve (Torque Converter Lockup Clutch) - Remove
Removal Procedure
- Remove four bolts (1) and the washers and remove selector valve (2) from transmission (3) .
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
Illustration 1 | g00470392 |
The transmission has been removed for photographic purposes. |
Caterpillar Information System:
963C Track-Type Loader Machine Systems Blower Motor (Air Conditioner and Heater) - Remove and Install
Weld Repair Instructions for the Cab{7301} Weld Repair Instructions for the Cab{7301}
953C Track-Type Loader Machine Systems Bumper - Remove and Install
966F Series II Wheel Loader Power Train Limited Slip Differential - Assemble
980G Wheel Loader Braking System Gear Pump (Pilot and Braking)
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Filling and Flushing the Hydrostatic System - Test
G3B, K3A and L3A Denso Alternators Initial Troubleshooting Procedure
D9R Track-Type Tractor Hydraulic System Oil Level - Check
D11R Track-Type Tractor Electro/Hydraulic Oil Filter - Change
980G Wheel Loader Braking System Liquid Level Switch (Hydraulic Tank)
D8R Track-Type Tractor Engine Air Filter Secondary Element - Replace
D7R Track-Type Tractor Hydraulic System Bulldozer Tilt Cylinder
902 and 906 Compact Wheel Loaders Steering System Hydraulic Oil Contamination - Test
Critical Dimensions for Bucket Control Linkage {6107} Critical Dimensions for Bucket Control Linkage {6107}
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train General Testing and Adjusting Information
D7R Track-Type Tractor Hydraulic System Ripper Lift Cylinder
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train General Troubleshooting Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Hydrostatic System - Test and Adjust
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Machine Preparation for Troubleshooting
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Visual Inspection
980G Wheel Loader Hydraulic System Vane Pump (Implement and Hydraulic Fan)
631E Series II Wheel Tractor-Scrapers Auger Hydraulic System Oil Filter - Replace
953C Track-Type Loader Machine Systems Air Conditioner Belt - Remove and Install
D8R Track-Type Tractor Engine Air Filter Primary Element - Clean/Replace