Elevator Control Valve - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose of all fluids according to local regulations and mandates. |
- Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
- Install the elevator control valve to the machine. The elevator control valve weighs 35 kg (77 lb). Install two bolts (34) and (33) to elevator control valve (2) . Remove the nylon lifting strap and the hoist from the elevator control valve.
Show/hide table
Illustration 1 | g00455738 |
- Install tube (32) to elevator control valve (2) and tighten two retaining nuts (31) and (30) .
Show/hide table
Illustration 2 | g00455737 |
- Connect hose (29) to elevator control valve (2) and tighten retaining nut (28) .
Show/hide table
Illustration 3 | g00455736 |
- Connect hose (27) to elevator control valve (2) and tighten retaining nut (26) .
Show/hide table
Illustration 4 | g00455735 |
- Position hose (25) to elevator control valve (2) . Install two half flanges (24) and four bolts (23) to elevator control valve (2) .
Show/hide table
Illustration 5 | g00455734 |
- Position hose (22) to elevator control valve (2) . Install two half flanges (21) and four bolts (20) to elevator control valve (2) . Position hose (19) to elevator control valve (2) . Install two half flanges (18) and four bolts (17) to elevator control valve (2) .
Show/hide table
Illustration 6 | g00455733 |
- Install yoke rod end (16) to elevator control valve (2) . Install pin (15) to yoke rod end (16) . Install cotter pin (14) to pin (15) . Connect hose (13) to elevator control valve (2) and tighten retaining nut (12) .
Show/hide table
Illustration 7 | g00455732 |
- Install bracket (4) to the machine. Install two bolts (11) to bracket (4) .
Show/hide table
Illustration 8 | g00455731 |
- Install two bolts (10) to bracket (4) . Connect tube (9) and tighten retaining nut (8) .
Show/hide table
Illustration 9 | g00455729 |
- Install four bolts (6) to fender (7) .
Show/hide table
Illustration 10 | g00455728 |
- Connect electrical connection (5) and install electrical connection (5) to the clip. Install the clip and bolt (3) to bracket (4) . Install the clip and nut (1) to the elevator control valve (2) .
Show/hide table
Illustration 11 | g00455727 |
- Fill the hydraulic tank. Refer to Owner's Manual, SEB6447 for information on refilling the hydraulic tank.
Caterpillar Information System:
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Remove
992G Wheel Loader Machine Systems Ride Control Valve - Install
994D Wheel Loader Power Train Rim Mounting
615C Series II Wheel Tractor-Scraper Machine Systems Pilot Control Valve (Elevator) - Assemble
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Disassemble
Repair of Boom and Bucket Stop Alignment{6107, 6501} Repair of Boom and Bucket Stop Alignment{6107, 6501}
902 and 906 Compact Wheel Loaders Hydraulic System Lift Cylinder
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Leakage - Test
613C Series II Wheel Tractor-Scraper Machine Systems Vane Motor (Elevator) - Assemble
994D Wheel Loader Power Train Rollover Protective Structure (ROPS)
992G Wheel Loader and 854G Wheel Dozer Steering System Steering Neutralizer Valve - Check and Adjust
966G Wheel Loader and 972G Wheel Loader Power Train Output Transfer Gears
994D Wheel Loader Power Train Torque Converter System Specifications
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Assemble
994D Wheel Loader Power Train Temperature Sensor (Torque Converter Outlet Oil)
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Coolant Temperature Switch
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System Backup Alarm
D6G Track-Type Tractor Power Train Final Drive Gear, Idler Pinion and Bearings - Install
994D Wheel Loader Power Train Speed Sensor (Transmission Output)
966G Wheel Loader and 972G Wheel Loader Power Train Engine and Transmission Mounting
615C Series II Wheel Tractor-Scraper Machine Systems Diverter Valve (Elevator) - Disassemble
994D Wheel Loader Secondary Steering
992G Wheel Loader Machine Systems Boom - Remove
D6G Track-Type Tractor Power Train Sprocket Shaft - Remove