Belt Tensioner
Show/hide table
Illustration 1 | g01343397 |
(A) Minimum travel ... 71 degrees
(1) Torque for the spring at 25 degrees from free arm stop ... 15.3 ± 2.3 N·m (11 ± 2 lb ft)
Caterpillar Information System:
C27 and C32 Engines Cylinder Liner Projection - Inspect
2004/09/01 An Improved Rocker Arm Base and an Improved Seal for the Rocker Arm Base are Now Used {1123, 1123}
G3500 Generator Sets Product Storage
G3306B Generator Sets Product Lifting
G3520B Industrial Engine Cat Data Link
C27 and C32 Engines Engine Valve Lash - Inspect/Adjust
C11 and C13 Petroleum Engines Cooling System
G3520B Industrial Engine Analog Sensor Signal
Applying Sealant For Improved Sealing of The Turbocharger{1052, 1065} Applying Sealant For Improved Sealing of The Turbocharger{1052, 1065}
G3500B Engines Overhaul (In-Frame)
Product Link - PL102C Specifications
Product Link - PL102C Commands
G3406 Engine Emergency Stopping
C11 and C13 Engines for Caterpillar Built Machines Cooling System - Check - Overheating
C11 and C13 Engines for Caterpillar Built Machines Water Pump - Test
C9 Marine Engines and C9 Marine Generator Sets Alternator and Regulator
3406E and C15 Marine Engines Electronic Control System Components
C11 and C13 Petroleum Engines Fuel System
2004/07/26 Special Instructions Are No Longer Announced In the Service Magazine {1000, 7000}
2004/07/01 Reusability of Connecting Rods {1218}
Installation of Conventional Duo-Cone Seals{7561} Installation of Conventional Duo-Cone Seals{7561}
C13, C15, and C18 Tier 4 Final Engines Turbocharger
G3500B Engines Cold Weather Starting
PMG3516 Power Module Maintenance Interval Schedule