Specifications
Show/hide table
Engine Specifications | |||
G3508 | G3512 | G3516 | |
Rated rpm | 1000 to 1500 | ||
Cylinders and arrangement | 65 degree Vee 8 | 65 degree Vee 12 | 65 degree Vee 16 |
Bore | |
||
Stroke | |
||
Displacement | |
|
|
Compression Ratio | Standard 9:1 | ||
Low Emission 11:1 | |||
Aspiration | Naturally aspirated | ||
Turbocharged aftercooled
Separate circuit aftercooling |
|||
Rotation (flywheel end) | Counterclockwise | ||
Firing Order | 1-2-7-3-4-5-6-8 | 1-12-9-4-5-8-11-2-3-10-7-6 | 1-2-5-6-3-4-9-10-15-16-11-12-13-14-7-8 |
Inlet valve lash | |
||
Exhaust valve lash | |
Show/hide table
Illustration 1 | g00845204 |
(A) Inlet valves
(B) Exhaust valves (C) Flywheel |
Show/hide table
Illustration 2 | g00845207 |
(A) Inlet valves
(B) Exhaust valves (C) Flywheel |
Show/hide table
Illustration 3 | g00845212 |
(A) Inlet valves
(B) Exhaust valves (C) Flywheel |
Caterpillar Information System:
324D and 326D Excavators Work Tool Control Pedal - If Equipped
Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397} Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397}
G3520B Industrial Engine System Configuration Parameters
2006/02/13 Two Adjustment Gauges Help the Technician Set the Lash for the Variable Valve Actuators {0703, 0763, 1100, 1209}
C7 Marine Engines Fuel Transfer Pump - Install
G3520B Industrial Engine Electronic Service Tools
C7 Marine Engines Fuel Transfer Pump - Remove
C7 Marine Engines Fuel Filter Base - Remove and Install
C15 On-highway Engines Housing (Front) - Install
C15 On-highway Engines Housing (Front) - Remove
C7 Marine Engines Fuel Priming Pump - Remove and Install
2004/06/01 A New Special Instruction, REHS2259 , "Fabricated Tool for Alternate Method of Tightening Fan Drive Belts" is Available {1357, 1397}
G3500 Engines Plate Locations and Film Locations
C11 and C13 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
325D and 329D Excavators Air Conditioning and Heating Control
C7 Marine Engines Injection Actuation Pressure Control Valve - Remove
C7 Marine Engines Injection Actuation Pressure Control Valve - Install
C7 Marine Engines Unit Injector Hydraulic Pump - Remove
C15 and C18 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C7 Marine Engines Unit Injector Hydraulic Pump - Install
C7 Marine Engines Turbocharger - Remove
C7 Marine Engines Turbocharger - Install
C15 On-highway Engines Valve Mechanism Cover Base - Remove and Install
C7 Marine Engines Exhaust Manifold - Remove and Install