Rocker Arm and Shaft - Remove
Removal Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 124-2946 | Lifting Bracket | 1 |
Start By:
- Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
- Remove the compression brake. Refer to Disassembly and Assembly, "Compression Brake - Remove".
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove shaft (2), valve rocker arms (1), and unit injector rocker arms (3) as a unit with Tooling (A) .
Show/hide table
 | |
| Illustration 1 | g01074086 |
Show/hide table
 | |
| Illustration 2 | g00517462 |
Show/hide table
 | |
| Illustration 3 | g01074087 |
Show/hide table
 |
Valve rocker arms and unit injector rocker arms can move on the shaft after the bolts have been removed. The shaft should be kept level when removed from the cylinder head. To avoid possible personal injury, keep fingers clear of the valve rocker arms and the unit injector rocker arms when lifting the assembly from the cylinder head. |
 |
- Repeat Step 1 for the remainder of the rocker arm assemblies.
Caterpillar Information System:
3406E, C-10 and C-12 On-highway Engines Vehicle Speed and Speedometer Circuit - Test
325D and 329D Excavators Power Receptacle - If Equipped
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
3512B Engine Product Storage
3508B, 3512B, and 3516B High Displacement Generator Sets Gauges and Indicators
3406E, C-10 and C-12 On-highway Engines Tachometer Circuit - Test
325D and 329D Excavators Stopping the Engine
2006/01/01 A New Type of Main Bearing is Available {1203}
2006/01/02 A New Type of Main Bearing is Available {1203}
2005/12/26 A New Type of Main Bearing is Available {1203}
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Battery - Replace - Controller Board
C27 and C32 Engines for Caterpillar Built Machines Housing (Front)
3408E and 3412E Engines for Caterpillar Built Machines Coolant Conditioner Base
3406E, C-10 and C-12 On-highway Engines Warning Lamp Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
3508B, 3512B, and 3516B High Displacement Generator Sets Starting the Engine
C15 and C18 Industrial Engines Flywheel Adapter
C15 and C18 Industrial Engines Flywheel Adapter
C15 and C18 Industrial Engines Flywheel Housing
3406E, C-10 and C-12 On-highway Engines Engine Speed/Timing Sensor - Calibrate
2004/07/26 Caterpillar Remanufactured Products Group Announces the Introduction of the Help Line Reference Tool {1000, 7000}
2004/07/01 Caterpillar Remanufactured Products Group Announces the Introduction of the Help Line Reference Tool {1000}
2004/08/01 Caterpillar Remanufactured Products Group Announces the Introduction of the Help Line Reference Tool {1000}
3406E, C-10 and C-12 On-highway Engines Vehicle Speed Circuit - Calibrate