CID 0004 FMI 11 Cylinder #4 Injector fault
产生此代码的情况:
电子控制模块(ECM)正尝试运行喷油器。 ECM 监测到喷油器电路中有开路或短路。
如果引起诊断代码的原因是公用线的故障,两个气缸会由于共用喷油器的公用线而受到影响。
系统响应:
ECM 将会记录此诊断代码。 ECM 在记录该代码后还会继续尝试运行喷油器。
存在此情况时喷油器可能无法运行。
- 发动机缺火
- 功率过低
测试步骤 1. 进行以下的诊断步骤: 喷油器电磁阀电路 - 测试
结果:
- 正常 - 停止
Caterpillar Information System:
3126B Engine for Caterpillar Built Machines CID 0003 FMI 11 Cylinder #3 Injector fault
3126B Engine for Caterpillar Built Machines CID 0002 FMI 11 Cylinder #2 Injector fault
3126B Engine for Caterpillar Built Machines CID 0001 FMI 11 Cylinder #1 Injector fault
G3520C and G3520E Generator Set Engines Exhaust Elbow - Remove and Install
3126B Petroleum Engine Installation Environment
2004/04/01 The Heat Exchanger Bonnet can be Rotated on Certain Applications {1379}
3406E, C12, C15 and C18 Marine Engines Flash Codes
C7 Marine Engine Cooling System - Check - Overheating
3406E and 3456 Generator Set Engines ECM Will Not Communicate with Other Systems or Display Modules
C-15 Petroleum Engine Auxiliary Water Pump
3406E and 3456 Generator Set Engines Coolant in Engine Oil
G3520C and G3520E Generator Set Engines Turbocharger - Assemble - Dual Turbochargers
C15 and C18 Industrial Engines Fuel Filter Base - Disassemble
3126B Engine for Caterpillar Built Machines CID 0005 FMI 11 Cylinder #5 Injector fault
C15 and C18 Industrial Engines Fuel Filter Base - Assemble
3126B Engine for Caterpillar Built Machines CID 0006 FMI 11 Cylinder #6 Injector fault
C15 Petroleum Engines Water Pump - Remove
C-15 Petroleum Engine Troubleshooting
C15 Petroleum Engines Water Pump - Install
3406E, C-10 and C-12 On-highway Engines ATA (SAE J1587 / J1708) Data Link Circuit - Test
C15 and C18 Industrial Engines Belt Tightener - Remove
C15 and C18 Industrial Engines Belt Tightener - Install
C15 and C18 Industrial Engines Belt Tightener - Disassemble
C15 and C18 Industrial Engines Belt Tightener - Assemble