1979/04/23 Caterpillar


Dampeners Added To Steering Brake Group To Prevent Noise From Vibration Of Brake Band Assembly{4110}

Usage:


D3 Tractors and 931 Loaders

Description of Change: Dampeners have been added to the steering brake group to prevent noise from vibration of the brake band assembly on D3 Tractors and 931 Loaders (See Illustration 1). The new parts were first used starting with the serial numbers shown in the chart.

Adaptable As: The new parts are adaptable to all earlier D3 Tractors and 931 Loaders if a modification to the brake band assembly is made. See Illustration 2. The new parts are installed as shown in Illustration 1.


Illustration 1. Location of new parts.


Illustration 2. Location of new holes in brake band assembly.

Caterpillar Information System:

1979/04/23 New Retainer Used Between Bolt And Gear In The Torque Converter{3101}
1979/04/23 Two Bolts Have Been Added At The Junction Of The Converter And Retarder Housing To Prevent O-Ring Seal Damage{3109}
1979/04/16 Different Type Brake Lining In Steering Brake Group; Higher Oil Level Used With New Lining{4110,3004}
1979/04/16 New Flywheel Clutch Uses Three Driven Discs Instead Of Two; Must Be Used Only With New Flywheel{3052,3054,1156}
1979/04/16 90° Elbows On Quick Disconnect Couplers Make Installation Easier{0690}
1979/04/16 Longer Self-Locking Bolts Now Used To Hold The Parking Brake Group To The Bearing Retainer{3161,3275,4267}
1979/04/16 How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly{0654,1250}
1979/04/16 Hydraulic Accumulator Now Used In Lines Group For Draft Frame{5077,5057,5314,5055}
1979/04/16 Clean The Orifice In The Pressure Control Group During A Transmission Overhaul{3167}
1979/04/16 Testing And Adjusting Procedure For 5P4210 Modular Cab Tilting Cylinder And Valve{0620}
1979/04/09 New Fan Motors Used In Cab Pressurizers{7311}
1979/04/09 Separate Scraper Batteries And Electronic Transmission Controls Now Used{1400,3168}
1979/04/23 Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23 New Oil Cooler Bonnets Used On 3408 And 3412 Engines{1378,1354,1380}
1979/04/23 New Retaining Rings Used In Planetary Groups For Power Shift Transmissions{3176,3150}
1979/04/23 Dowtherm Test Strips No Longer Available{0651,1350}
1979/04/23 Reinforcement Of Draft Frame Gooseneck To Prevent Cracks{6220,6209,6207}
1979/04/23 New Metering Pump In Steering System Has Improved Internal (Inside) Seals{4306}
1979/04/30 The 6B5067 Race And Roller Assembly, Used In Final Drive Group, Can Be Either Of Two Designs{4050,4091}
1979/04/30 New " Drive 6V94 Universal Joint Is Available{0612,1253}
1979/04/30 2P8316 Dowel Now Available For Parts Service{0652}
1979/04/30 The Service Life Of A Power Shift Transmission Is In Direct Relation To The Maintenance Of Its Lubrication System{3004,3179,3150}
1979/04/30 If Loose Bolts Are A Problem, A Modification Can Be Made To The Plate Used To Hold The Leveling Valve For The Cushion Hitch{5313,7107}
1979/04/30 New Ring Gears Used In Flywheel Assemblies{1158}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.