Bearing - Lubricate
Lubricate bearings in accordance with the lubricating instructions on the generator.
Show/hide table
Illustration 1 | g00937091 |
(1) Lubricating instructions |
Use 2S-3230 Special Grease (SPG) for ball bearings on 2400, 2500, and 2600 frames. This is an NLGI No. 2 Grade that has thicker Polyurea. There is no molybdenum disulfide in this grease. The temperature range is −29 °C (−20.2 °F) to 177 °C (350.6 °F). Use NLGI 1 or 0 Grade for extremely low temperatures.
Use Caterpillar 100-2704 Grease Cartridge for cylindrical roller bearings on 2800 and 2900 frames.
Show/hide table
Generator Frame Size and Location     | Type of Grease     | Amount of Grease that is Required in the Cavity (ounce)     |
---|---|---|
Drive end of a "2400" frame     | 2S-3230 Bearing Lubricant     | 13.5 to 18.5     |
Exciter end of a "2400" frame     | 2S-3230 Bearing Lubricant     | 10.3 to 14.2     |
Drive end of a "2500" frame     | 2S-3230 Bearing Lubricant     | 13.5 to 18.5     |
Exciter end of a "2500" frame     | 2S-3230 Bearing Lubricant     | 10.3 to 14.2     |
Both ends of a "2600" frame     | 2S-3230 Bearing Lubricant     | 13.5 to 18.5     |
Both ends of a "2800" frame     | 100-2704 Grease Cartridge     | 5.2 to 7.2     |
Both ends of a "2900" frame     | 100-2704 Grease Cartridge     | 5.2 to 7.2     |
Caterpillar Information System:
C-18 Truck Engines Sensors and Electrical Components
C-18 Truck Engines Engine Description
C-18 Truck Engines Model View Illustrations
C9 Marine Auxiliary and Generator Set Engines Engine Oil Level Gauge - Calibrate
G3520B Engines MID 033 - CID 0320 - FMI 08 Engine Speed/Timing signal abnormal
G3520B Engines MID 033 - CID 0320 - FMI 03 Speed/Timing Sensor short to +batt
3054E Industrial Engine Piston and Rings
797 and 797B Off-Highway Truck Power Train Electronic Control System Machine Speed Correction
Rework Instruction for Transformers for G3400C Engines with Tall Cylinder Heads{1409, 1550, 1561} Rework Instruction for Transformers for G3400C Engines with Tall Cylinder Heads{1409, 1550, 1561}
Rework Instruction for Transformers that are approved by the Canadian Standards Association (CSA) for G3400C Engines with Tall Cylinder Heads{1550, 1561} Rework Instruction for Transformers that are approved by the Canadian Standards Association (CSA) for G3400C Engines with Tall Cylinder Heads{1550, 1561}
3054E Industrial Engine Connecting Rod - For Use With Steel Crankshaft
2002/08/01 A New Rubber Boot Is Available To Help Protect The Actuator Shafts In The Hydrax System {1716}
C-15 Truck Engine Exhaust Manifold
C-18 Truck Engines Engine Oil Level - Check
C-18 Truck Engines Engine Oil Level Gauge - Calibrate
C-18 Truck Engines Engine Oil and Filter - Change
C-18 Truck Engines Fuel System - Prime
3406C Industrial Engine Fuel System Secondary Filter - Replace
3054E Industrial Engine Connecting Rod Bearing Journal - Steel Crankshaft
3054E Industrial Engine Crankshaft Seals
C-15 Truck Engine Water Lines
C4.4 (Mech) Industrial Engine Valve Mechanism Cover
3408C, 3412C and 3412D High Performance Marine Engines Exhaust Manifold
3054E Industrial Engine Fuel Injection Nozzles