Before/After
| PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAB POST ASSEMBLY ON CERTAIN D6K TRACK-TYPE TRACTORS |
7301 |
PS43088 |
NOTE: |
This Program must be administered either before or after failure.
In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS43088" as the Part Number
and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code.
If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
|
NOTE: |
This Revised Service Letter replaces the 25May2010 Service Letter. Changes have been made to Service Claim Allowances table to extend the age from 24 to 48 months. |
The existing cab post bolted joint may not be tightened to the correct torque on certain D6K Track-Type Tractors. The cab post bolted joint may be over or under tightened. If the cab post bolted joint is not tightened to the correct torque, it can lead to vibration and operator annoyance. |
No parts needed for this program |
Loosen the cab post bolted joint. Re-tighten the cab post bolted joint to a torque of 425 +/- 50 Nm (315 +/- 38 lb ft). Refer to Image 1 for bolt locations. |
Product smu/age whichever comes first |
Caterpillar |
Dealer Suggested |
Customer Suggested |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
0-2000 hrs, 0-48 mo |
100.0% |
100.0% |
0.0% |
0.0% |
0.0% |
0.0% |
NOTE: This is a 0.5-hour job
|
|
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
|
|
|