Piston Cooling Jet
Show/hide table
Illustration 1 | g00631670 |
Piston cooling jet alignment is shown from the top of the cylinder block. |
(1) Piston cooling jet
- Tighten the banjo bolts for the piston cooling jets to the following torque. ... 20 N·m (15 lb ft)
Note: Ensure that the piston cooling jet is positioned correctly on the dowel in the cylinder block (not shown).
(2) Rod
3054B Engine
Note: The 3054B engine has a single piston cooling jet at the number one cylinder position.
Use the following procedure in order to check the alignment of the piston cooling jet:
- Insert rod (2) into the end of the piston cooling jet. Rod (2) has a diameter of 1.70 mm (0.067 inch). Rod (2) should protrude out of the top of the cylinder block.
- Dimension (A) is 34.5 mm (1.36 inch) and dimension (B) is 22.5 mm (0.89 inch). Dimension (A) and dimension (B) are tangent to the cylinder bore.
- Position rod (2) within dimension (C). Dimension (C) is 14 mm (0.6 inch).
3054 and 3056 Engines
Use the following procedure in order to check the alignment of the piston cooling jet:
- Insert rod (2) into the end of the piston cooling jet. Rod (2) has a diameter of 1.70 mm (0.067 inch). Rod (2) should protrude out of the top of the cylinder block.
- Dimension (A) is 33 mm (1.3 inch) and dimension (B) is 21 mm (0.8 inch). Dimension (A) and dimension (B) are tangent to the cylinder bore.
- Position rod (2) within dimension (C). Dimension (C) is 14 mm (0.6 inch).
(3) Cylinder block
Caterpillar Information System:
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Swing Gear and Bearing - Install
Monitors For 3600 Diesel Monitoring Systems Connections
C7 On-highway Engine Fuel Transfer Pump - Install
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Travel Motor
CIPI UNDERCARRIAGE Arrangements: 3Q6662, 6Z7861, 6Z7885, 6Z7947, 6Z7957, 6Z7999, 9Q5044, 9Q5065, 9Q5082, 9Q5090, 9Q5093, 9Q5115, 9Q5118, 9Q5126, 9Q5135, 9Q5141, 9Q5168, 9Q5175, 9Q5206, 9Q5255, 9Q5259, 9Q5268, 9Q5412, 9Q5436, 9Q5464, 9Q5514, 9Q5617, 9 Travel Motor
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Swing Gear and Bearing - Remove
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Travel Motor - Assemble
2002/01/01 A New Extension Assembly Is Available For The Spark Plugs {1550}
Air/Fuel Ratio Control (Oxygen Feedback) System Setup Procedure
Monitors For 3600 Diesel Monitoring Systems Mounting
3126 Truck Engine Military Water Temperature Regulator Housing - Remove and Install
3512B Engine for SPF343, SPS343, and SPT343 Pumpers Speed Control
3126E On-highway Engine Unit Injector Hydraulic Pump - Install
CPT372 Truck Mounted Pumper Drive Shaft Universal Joints - Lubricate
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Swivel - Remove
3126E On-highway Engine Customer Specified Parameters Table
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Swivel - Install
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Swivel - Disassemble
320C Material Handler Machine System Specifications Travel Counterbalance Valve
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Swivel - Assemble
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Travel Counterbalance Valve
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Travel Motor - Install
3512B Engine for SPF343, SPS343, and SPT343 Pumpers Starting Motor System
3512B Engine for SPF343, SPS343, and SPT343 Pumpers Deck Start/Run/Kill Switch