A New Unit Injector Wiring Group Is Used on Certain C9.3 Machine Engines {1290, 1408}
- Excavator:
- 336E (S/N: YCE1-UP; TEG1-UP; GTJ1-UP; YEP1-UP; CMR1-UP; BZY1-UP; TMZ1-UP)
- Motor Grader:
- 12MSeries 2 (S/N: F9B1-UP; F9M1-UP; R9P1-UP; R9S1-UP)
- Mobile Hydraulic Power Unit:
- 336E MHPU (S/N: DSZ1-UP; T3Z1-UP)
- Track-Type Tractor:
- D6T (S/N: KSB1-UP; ZJB1-UP; DTD1-UP; EJJ1-UP; SLJ1-UP; GMK1-UP; RRK1-UP; TSM1-UP; WLM1-UP; PLR1-UP; JRW1-UP; RCW1-UP)
- Wheel Loader:
- 966K (S/N: PBG1-UP; TFS1-UP; NGX1-UP)
- 568 (S/N: BRB1-UP; YJX1-UP)
- 140MSeries 2 (S/N: M9D1-UP; R9G1-UP; M9J1-UP; R9M1-UP)
- 160MSeries 2 (S/N: M9E1-UP; M9K1-UP; R9L1-UP; R9T1-UP)
- D7E (S/N: TJA1-UP; TAN1-UP)
- 972K (S/N: PEM1-UP; Z4W1-UP)
Description of Change: A new unit injector wiring harness is now available for Tier 4i C9.3 Machine Engines. The new harness incorporates a protective sleeve on the exposed section of wiring connecting to the fuel injector to provide added protection against abrasion. Refer to Illustration 1.
Show/hide table
Illustration 1 | g03206556 |
(1) Location of protective sleeve |
Adaptable To: The new unit injector wiring group replaces the existing wiring group on the serial numbers listed above. Refer to Table 1 for a list of the new part numbers and the part numbers that are being replaced.
Show/hide table
New Part Number     | Former Part Number     |
399-4012     | 353-5939     |
399-4009     | 353-6103     |
Show/hide table
Effective Serial Numbers     |
S/N:MME11206-UP     |
S/N:MYE737-UP     |
Caterpillar Information System:
307E2 Mini Hydraulic Excavator Cooling System Coolant (ELC) - Change
307E2 Mini Hydraulic Excavator Condenser (Refrigerant) - Clean
2012/08/07 Special Instruction, REHS4944, "Procedures for the Repair of Cracks in Reach Booms on Certain Excavators" is Available {0679, 6501}
307E2 Mini Hydraulic Excavator Additional Messages
301.7D, 302.2D and 302.4D Mini Hydraulic Excavator Machine Systems Stick Cylinder
301.7D, 302.2D and 302.4D Mini Hydraulic Excavator Machine Systems Bucket Cylinder
301.7D, 302.2D and 302.4D Mini Hydraulic Excavator Machine Systems Boom Swing Cylinder
307E2 Mini Hydraulic Excavator Air Cleaner Dust Valve - Clean/Inspect
307E2 Mini Hydraulic Excavator Boom, Stick, and Frame - Inspect
318E Excavator Machine Systems Stick Cylinder - Remove and Install
318E Excavator Machine Systems Load Control Valve (Stick Cylinder) - Remove and Install
307E2 Mini Hydraulic Excavator Access Door and Cover Locations
307E2 Mini Hydraulic Excavator Engine Air Filter Element - Clean/Replace
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129} Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547} Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
307E2 Mini Hydraulic Excavator Engine Air Filter Service Indicator - Inspect
307E Mini Hydraulic Excavator Final Drive Oil Level - Check
308E2 Mini Hydraulic Excavator Fuel Tank Water and Sediment - Drain
307E2 Mini Hydraulic Excavator Hydraulic System Oil - Change
303.5E CR, 304E CR, 305E CR and 305.5E CR Mini Hydraulic Excavators Safety Messages
303E CR Mini Hydraulic Excavators Additional Messages
301.7D, 302.2D and 302.4D Mini Hydraulic Excavator Machine Systems Swing Motor
301.7D, 302.2D and 302.4D Mini Hydraulic Excavator Machine Systems Engine Mounting
301.7D, 302.2D and 302.4D Mini Hydraulic Excavator Machine Systems Joystick Control