Illustration 1 | g00766617 |
Typical example |
(1) Speed-timing sensor
- Lubricate the threads with engine oil prior to installation. Tighten the bolts to the following torque. ... 25 ± 5 N·m (18 ± 4 lb ft)
Illustration 2 | g00550498 |
Typical example of View A-A, View B-B, and View C-C |
(2) Brake stud
Apply 155-0695 Thread Lock Compound to the serrations of brake stud (2) prior to installation.
(3) Sealing washer
(4) Plate
(5) Bolt
Use the following procedure in order to tighten the bolts that fasten the plate to the cylinder block.
- Tighten the bolts.
Tighten the bolts to the following torque. ... 55 ± 5 N·m (40 ± 4 lb ft)
- Tighten the bolts again.
Tighten the bolts to the following torque. ... 55 ± 5 N·m (40 ± 4 lb ft)
(6) Washer
Note: Apply 8T-9022 Silicone Gasket in order to fill the space at the connecting joint of the front plate, oil pan gasket, and cylinder block.
Illustration 3 | g01037100 |
Access cover for the camshaft gear (Typical example) |
Except for the button head screws (X), tighten the bolts for the access cover in any order.
(X) Tighten the button head screws in a numerical sequence. Refer to Illustration 3. Torque for button head screws ... 13 ± 3 N·m (115 ± 27 lb in)