Wheeled Excavators Monitoring System Caterpillar


Reversing Fan Menu

Usage:

M315D2 CA4

  • 选择主菜单上的反转风扇屏幕更改反转风扇设定。 仅在机器上安装了反转风扇功能的情况下可使用反转风扇屏幕。



      图 1g03711384

    1. 进入反转风扇屏幕前,监控器向负责控制器请求当前值。

      如未安装反转风扇,显示器会显示"未安装"。

    1. 按下"确定"按钮后,监控器向机器控制器发送所需反转风扇间隔的书面请求。

      可能的调整有:

      • 反转风扇间隔:5 – 60 分钟,以一定转速转动。 缺省值为 20 分钟。

      • 模式:关/自动

      注: 操作员不可调整反转风扇持续时间。 反转风扇持续时间在发动机控制器中固定编程为 30 秒钟。 中间功能键编程设定为反转风扇超控功能,在间隔之间润滑机器。

  • Caterpillar Information System:

    300.9D and 300.9D VPS Mini Hydraulic Excavator Swing Frame and Cylinder Bearings - Lubricate
    Wheeled Excavators Monitoring System Hydraulic Modulation Menu
    422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
    300.9D and 300.9D VPS Mini Hydraulic Excavator Swing Gear - Lubricate
    300.9D and 300.9D VPS Mini Hydraulic Excavator Window (Front) - If Equipped
    300.9D Mini Hydraulic Excavator Stick Hydraulic System
    H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Buffer - Bottom
    Repair Procedure for the Boom Nose on the 324D Excavator{0679, 6501} Repair Procedure for the Boom Nose on the 324D Excavator{0679, 6501}
    H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Buffer - Bottom
    H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Buffer - Bottom
    300.9D and 300.9D VPS Mini Hydraulic Excavator Hydraulic System Oil Level - Check
    300.9D and 300.9D VPS Mini Hydraulic Excavator Hydraulic System Oil Sample - Obtain
    324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Belt Tightener - Remove and Install
    324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Electronic Control (ARD Combustion Air) - Remove and Install - Clean Emissions Module
    324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit Machine Systems Upper Frame and Undercarriage Frame - Connect
    300.9D and 300.9D VPS Mini Hydraulic Excavator Hydraulic System Oil - Change
    H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Tool Bushing (Lower)
    300.9D Mini Hydraulic Excavator Return Hydraulic System
    H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Tool Bushing (Lower)
    300.9D and 300.9D VPS Mini Hydraulic Excavator Hydraulic System Oil Filter (Return) - Replace
    300.9D Mini Hydraulic Excavator Bucket Hydraulic System
    H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Tool Bushing (Lower)
    2012/01/31 An Improved Pin for the Boom is Now Used on Certain Excavators and Mobile Hydraulic Power Units {6501}
    345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System E-Ceiling and Cab Avoidance - Troubleshoot
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.