Engine Oil Temperature Sensor
Show/hide table
Illustration 1 | g00294228 |
(1) Sensor assembly
Tighten the sensor assembly to the following torque. ... 20 ± 3 N·m (15 ± 2 lb ft)
Caterpillar Information System:
G3408 and G3412 Engines Exhaust Manifold - Water Cooled
3608 Engine Specifications
3114, 3116, and 3126 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
G3408 and G3412 Engines Cylinder Head
G3408C and G3412C Engines Cylinder Head
3126B Industrial Engine Alternator and Regulator
C9 Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install
2001/04/01 New Two-Stage Choke Assembly Linkage Is Introduced {1071}
G3408C and G3412C Engines Valve Mechanism
3126B Industrial Engine Front Housing and Covers
C9 Engine For Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install
3054E and 3056E Industrial Engines Stopping the Engine
C9 Engine For Caterpillar Built Machines Cylinder Block Cover - Remove and Install
3500B Industrial Engines Engine Sensor Open/Short Test
3054, 3054B and 3056 Marine Engines Aftercooler - Disassemble
3608 Engine Tools
G3408 and G3412 Engines Valve Cover
320E and 323E Excavators VA Boom Controls - If Equipped
3054, 3054B and 3056 Marine Engines Aftercooler - Assemble
C9 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
2001/06/01 A New Rubber Boot Is Available To Help Protect The Actuator Shafts In The Hydrax System {1716}
3126B Industrial Engine Reference Material
2001/01/01 New Spark Plugs Are Available {1555}