New Software for the Auxiliary Hydraulic Circuits Is Available {7610, 7620}
- Excavator:
- 320D (S/N: CXY1-UP)
- 320D L (S/N: DHK1-UP)
- 320D RR (S/N: GKL1-UP)
- 320D LRR (S/N: EBY1-UP)
- 323D L (S/N: SDC1-UP; JLG1-UP; PBM1-UP)
- 323D S (S/N: SED1-UP; DKW1-UP)
- 323D LN (S/N: RAC1-UP; CYD1-UP)
- 324D L (S/N: LAB1-UP; T2D1-UP; JJG1-UP; SYM1-UP)
- 324D FM (S/N: JKR1-UP; JLS1-UP)
- 324D FM LGP (S/N: JGK1-UP)
- 324D LN (S/N: EJC1-UP)
- 325D L (S/N: GPB1-UP; MCL1-UP; PAL1-UP; A3R1-UP; GBR1-UP; T2S1-UP)
- 325D MH (S/N: C4H1-UP; RJK1-UP)
- 325D FM (S/N: C7K1-UP; C8L1-UP; C9M1-UP)
- 325D LN (S/N: PKE1-UP)
- 328D LCR (S/N: GTN1-UP; MKR1-UP)
- 330D L (S/N: B6H1-UP; THJ1-UP; ERN1-UP; JLP1-UP; HAS1-UP; RAS1-UP; T2Y1-UP)
- 330D MH (S/N: C5K1-UP; LEM1-UP)
- 330D FM (S/N: E4K1-UP; H3K1-UP; L2K1-UP)
- 330D LN (S/N: GGE1-UP)
New software is available for the direct replacement of former software on the models that are listed. The new software and the former software are listed in Table 1. The new software prevents damage to the work tool from an excessive flow of hydraulic fluid.
If 3 is selected for the tool control system and Hammer is selected for the tool parameter, the former software for the auxiliary hydraulic controller generated a signal for a double volume of hydraulic oil flow to the hammer. The double volume of hydraulic oil flow to the hammer could damage the work tool.
Install the new software in the field before configuring the machine to the tool parameter for a hammer.
Show/hide table
New Machine Software     | ||
---|---|---|
Model     | New Part Number     | Former Part Number     |
320D (1) 323D (1)     |
297-4574     | 279-7611     |
324D (2)     | 297-4535     | 279-7707     |
324D (1)     | 297-4533     | 279-7705     |
325D (2)     | 297-4539     | 290-9338     |
325D (1)     | 297-4537     | 290-9336     |
328D (1)     | 297-4541     | 290-9419     |
328D (2)     | 297-4543     | 290-9421     |
330D (2)     | 297-4547     | 279-7690     |
330D (1)     | 297-4545     | 279-7613     |
Show/hide table
( 1 ) | Standard Engine Horsepower |
( 2 ) | High Engine Horsepower |
Caterpillar Information System:
2007/06/18 A New Idler Pulley Is Available for the Engine Pulley Group {1361}
Filtration Procedure for Oil in the Motor Grader Tandem Drive {0680, 0738, 0768, 4062, 4064} Filtration Procedure for Oil in the Motor Grader Tandem Drive {0680, 0738, 0768, 4062, 4064}
C4.2 and C6.4 Engines for Caterpillar Built Machines Compression - Test
C4.2 and C6.4 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines Fuel System - Prime
321D LCR Excavator Lifting Capacities
C4.2 and C6.4 Engines for Caterpillar Built Machines Fuel Injection Timing - Check
C4.2 and C6.4 Engines for Caterpillar Built Machines Cooling System
C4.2 and C6.4 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
325C MHPU Mobile Hydraulic Power Unit Hydraulic Tank Screen - Clean
325C MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Level - Check
325C MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Filter (Pilot) - Replace
M313D, M315D, M316D, M318D and M322D Excavators and M318D MH and M322D MH Material Handlers Lifting Capacities - M316D Excavator with a Offset Boom (Heavy Lift Option)
C4.2 and C6.4 Engines for Caterpillar Built Machines Engine Oil Pressure - Test
C4.2 and C6.4 Engines for Caterpillar Built Machines Engine Oil Pump - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines Connecting Rod - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines Cylinder Head - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines Piston Height - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines Flywheel - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines Flywheel Housing - Inspect
M313D, M315D, M316D, M318D and M322D Excavators and M318D MH and M322D MH Material Handlers Lifting Capacities - M318D MH Excavator
M313D, M315D, M316D, M318D and M322D Excavators and M318D MH and M322D MH Material Handlers Lifting Capacities - M322D MH Excavator
2007/04/23 Shut Off Valves Lock the Thumb of Backhoe Loaders {1329, 6547}
R2900G Load Haul Dump Bucket Control Group Safety Pins