Speed/Timing Sensor
Show/hide table
Illustration 1 | g01432017 |
Camshaft position sensor |
(1) Sensor
(2) Bracket
Ensure that the bracket is installed in the orientation that is shown.
(3) Tighten the bolt to the following torque: ...
Ensure that the sensor is seated before the bolt is tightened.
Show/hide table
Illustration 2 | g01432020 |
Crankshaft position sensor |
(4) Sensor
(5) Bracket
Ensure that the bracket is installed in the orientation that is shown.
(6) Tighten the bolt to the following torque: ...
Ensure that the sensor is seated before the bolt is tightened.
Caterpillar Information System:
2002/12/23 Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Excessive Valve Lash
3126B Engines Turbocharger - Inspect
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Prelubrication System
3126B Engines Inlet Manifold Pressure - Test
325, 325B and 325L Excavators Swivel
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Injector Solenoids
325, 325B and 325L Excavators Oil Makeup (Travel System)
325, 325B and 325L Excavators Travel Counterbalance Valve
3126B Engines Gear Group (Front) - Time
3126B and 3126E Truck Engine Fuel System Pressure - Test
3126B Engines for Caterpillar Built Machines Turbocharger - Install
2000/07/01 Improved Tube Clips Reduce Vibration of Hydrax Actuator Oil Lines {1307, 1716}
3176C and 3196 Engines for Caterpillar Built Machines Engine Design
3126B and 3126E Truck Engine Engine Oil Pressure Sensor - Test
G3516B Engines MID 036 - CID 0320 - FMI 08 Engine Speed/Timing signal abnormal
3126B and 3126E Truck Engine Engine Oil Pump - Inspect
3176C and 3196 Engines for Caterpillar Built Machines General Information
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Speed Control
G3406 Engine Reference Material
3176C and 3196 Engines for Caterpillar Built Machines Cooling System
325, 325B and 325L Excavators Relief Valve (Crossover) - Test and Adjust
G3406 Engine Valve Data Sheet
325, 325B and 325L Excavators Travel Motor - Test