Fuel Injection Nozzle And Adapter
Usage:
(1) Torque for fuel injection line nut ... 42 ± 7 N·m (31 ± 5 lb ft)
(2) Torque for retainer ... 48 ± 7 N·m (35 ± 5 lb ft)
(3) Tighten bleed screw to a torque of ... 2.7 ± 0.8 N·m (24 ± 7 lb in)
Always use a new washer (seal) anytime the bleed screw is removed.
(4) Washer. Make sure the correct washer is used when the nozzle assembly is installed.
(5) Put liquid soap on the rubber O-ring seal and in the bore in the head before assembly.
(6) Put 5P3931 Anti-Seize Compound on the threads of the adapter before installation. Torque for the adapter ... 200 ± 14 N·m (150 ± 10 lb ft)
Torque for the nut on the adapter assembly ... 72 ± 7 N·m (53 ± 5 lb ft)
Caterpillar Information System:
3406C GENERATOR SET ENGINE Fuel Injection Lines
3406C GENERATOR SET ENGINE Engine Design
3406C GENERATOR SET ENGINE Introduction
3306B GENERATOR SET ENGINE Engine & Generator
3306B GENERATOR SET ENGINE Piston Cooling Orifices
3306B GENERATOR SET ENGINE Crankshaft
3306B GENERATOR SET ENGINE Camshaft Bearings
3306B GENERATOR SET ENGINE Camshaft
3306B GENERATOR SET ENGINE Timing Gears & Plate
3306B GENERATOR SET ENGINE Timing Gear Cover
3306B GENERATOR SET ENGINE Front Support
3306B GENERATOR SET ENGINE Crankshaft Front Seal & Wear Sleeve
3406C GENERATOR SET ENGINE Fuel Transfer Pump
3406C GENERATOR SET ENGINE Fuel Injection Pump
3406C GENERATOR SET ENGINE Fuel Injection Pump Housing
3406C GENERATOR SET ENGINE Governor
3406C GENERATOR SET ENGINE Governor And Fuel Pump Drive Group Automatic Timing Advance Unit
3406C GENERATOR SET ENGINE Primary Fuel Filter
3406C GENERATOR SET ENGINE Fuel Filter Base
3406C GENERATOR SET ENGINE Idler Gear Shaft Pilot Bore
3406C GENERATOR SET ENGINE Idler Gear Assembly (For Front Gear Group)
3406C GENERATOR SET ENGINE Front Housing And Covers
3406C GENERATOR SET ENGINE Front (Timing) Gear Group
3406C GENERATOR SET ENGINE Accessory Drive Groups