Relief Valve (Main)
Show/hide table
Illustration 1 | g01183225 |
Main Control Valve (1) Main Relief Valve (P2) (2) Main Relief Valve (P1) (3) Main Relief Valve (P3) |
The main relief valves are attached to the main control valve. The P1 and P2 relief valves regulate the main pump's output pressure. The P3 relief valve controls the pressure of the swing pump. The relief valves protect the hydraulic circuits from damage that could occur from pressure that is too high. Refer to Specifications, RENR9155, "Main Control Valve" for the system's pressure and flow specifications.
Caterpillar Information System:
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Blade Hydraulic System
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Hydraulic System Oil - Change
324D Excavator Hydraulic System Main Hydraulic System
325C LCR Excavator Machine Systems Platform - Remove
C9.3 Engines for Caterpillar Built Machines Engine Oil Pressure - Test
2005/05/30 The Bearing in the Fan Pump Is Improved {1387, 5073}
2011/03/09 An Improved Lifter Is Used for 3500 Engines with Mechanical Unit Injectors {1102, 1121, 1123}
M318C and M322C Excavators Machine Systems Cab Riser and Frame - Remove and Install
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Symbols
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Hydraulic System Oil Filter (Return) - Replace
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Hydraulic System Oil Cooler Core - Clean
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Hydraulic System Oil Level - Check
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Implements and Swing Controls Alternate Patterns - If Equipped
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Main Hydraulic System
M313C and M315C Excavators Joystick Controls
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Cab Air Filter (Fresh Air) - Clean/Replace
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Blade Linkage - Lubricate
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Boom and Stick Linkage - Lubricate
C9 Generator Set Fuel System Primary Filter (Water Separator) Element - Replace
325C LCR Excavator Machine Systems Platform - Install
2014/08/01 A New Fuel Transfer Pump Has Been Released {1256}
Replacing Tooth Holders on the Rotary Cutter Drum for the HM312 and HM315{0751, 6638} Replacing Tooth Holders on the Rotary Cutter Drum for the HM312 and HM315{0751, 6638}
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Pilot Valve (Joystick) - Remove
C4.4 Industrial Engine Burn Prevention